Investigación

Assessment of torque and power in an internal combustion engine using partial mixtures of biodiesel

Vol. 12 No. 20 (2016)
Published: 01-10-2016
Guillermo Gorky Reyes Campaña
Universidad Internacional del Ecuador
José Andrés Castillo Reyes
Universidad Internacional del Ecuador
Alex Xabier Escalante Quezada
Universidad Internacional del Ecuador

Introduction: This article is the result of the research “Assessment of torque and power in an internal combustion engine using partial mixtures of biodiesel at 2,800 masl (meters above sea level), according to the norm sae j1349 and inen rte 017”, conducted by the research group of the Faculty of Motor Vehicle Engineering of the International University of Ecuador (Quito), from May 1, 2014 to July 13, 2015. The research concluded biodiesel’s behavior at certain heights, specifically at 2,800 masl, using partial mixtures of biodiesel with Colombian and Ecuadorian nationally produced biodiesel.

Methodology: The comparative mathematical analysis is described of biofuel samples in percentages of B5, B10 and B30, furnished by the company Lafabril, while taking into account environmental factors native of the country where the tests were being conducted.

Results: The data produced in the lab was quantitatively substantiated with partial mixtures of biodiesel, and in such a way were obtained the curvatures of torque and power, as well as the emission of particulate matter.

Discussion: Using the characteristics of local fuel and their respective partial mixtures of biofuel, a decrease of particulate matter and efficient values of torque and power in biofuel B30 were obtained, being this last one the most stable and regular,
since it didn’t produce spikes in the obtained information.

Keywords: biodiesel, pollution, performance, sustainable development, standards

How to Cite

[1]
G. G. Reyes Campaña, J. A. Castillo Reyes, and A. X. Escalante Quezada, “Assessment of torque and power in an internal combustion engine using partial mixtures of biodiesel”, ing. Solidar, vol. 12, no. 20, pp. 23–31, Oct. 2016, doi: 10.16925/in.v19i20.1413.

F. Narváez, F. Sierra y M. Montenegro, “Modelo basado en redes neuronales para predecir las emisiones en un motor diésel que opera con mezclas de Biodiesel de Higuerilla”, Informador Técnico, no. 76, pp. 46-61, enero 2012.

Asociación de Empresas Automotrices del Ecuador aeade. Anuario 2014. Quito, Ecuador: Gestión creativa, 2014, p. 24. [en línea]. Disponible en http://tinyurl.com/h9nx8ug.

P. N. Benjumea, J. R. Agudelo y L. A. Ríos, “Propiedades de flujo a baja temperatura del biodiésel de aceite de palma”, Revista Facultad de Ingeniería Universidad de Antioquia, vol. 42, pp. 94-104, diciembre 2007.

M. Camps y F. M. Martin, Los Biocombustibles.Madrid, España: Mundiprensa, 2004. pp. 65-69.

NextFuel, “Biodiésel Argentina” [en línea]. Disponible en: http://biodiesel.com.ar/historia-del-bio-diesel.

E. Pérez, M. Otero A. Delgado, “Producción de biodiésel a partir de organismos oleaginosos. Una fuente de energía renovable”, icidca, vol. 46, no. 1, pp. 22-32, 2012.

G. Knothe, The Biodiesel Handbook. Champaign, Illinois: aocs Press, 2005. pp. 137-139.

P. Benjumea, J. Agudelo A. Agudelo, Basic Proper-ties of Palm Oil Biodiesel-Diesel Blends. Antioquia, Colombia: Elsevier, 2007. pp. 2069-75.

Instituto Ecuatoriano de Normalizacion (inen), Norma Técnica Ecuatoriana nte inen 1489:2012 Derivados del Petroléo. Diésel requisitos; séptima revisión. Quito, Ecuador: inen, 2012. [en línea]. Disponible en https://law.resource.org/pub/ec/ibr/ec.nte.1489.2012.pdf.

S. M. Rincón y D. M. Martínez, “Análisis de las propiedades del aceite de palma en el desarrollo de su industria”, Revista Palmas, vol. 30, n.º 2, pp. 11-24, 2009. [en línea]. Disponible en: publicaciones.fedepalma.org/index.php/palmas/article/view/1432/1432

Instituto Ecuatoriano de Normalización (inen), “Legal Office faolex” [en línea]. Disponible en http://faolex.fao.org/docs/texts/ecu83403.doc

sae International, sae J1349. Engine Power Test Code. Spark Ignition and Compression Ignition, Net Power Rating. Warrendale, 2004.

G. Zambrano, C. Sosa y A. Hernández, “Emisión de gases en vehículo experimental diésel-biodié-s e l ”, Revista Universidad del Valle, no. 27, pp. 64-67, 2014

W. Pulkrabek, Engineering Fundamentals of the In-ternal Combustion Engines (2da. ed.). Platteville, usa: Prentice Hall, 2003. p. 382.

Centro de Capacitación e Investigación en Control de Emisiones (ccicev), Ladrón de Guevara y Toledo (Campus Rubén Orellana), Quito-Ecuador.

Instituto Ecuatoriano de Normalización (inen), “Public Resource Org”, dic., 2012 [en línea]. Disponible en: https://law.resource.org/pub/ec/ibr/ec.nte.2202.2000.pdf

Instituto Ecuatoriano de Normalizacion (inen), “Public Resource Org”, 2011 [en línea]. Disponible en: https://law.resource.org/pub/ec/ibr/ec.n-te.2207.2002.pdf

T. D. Durbin, J. R. Collins, J. M. Norbeck y M. R. Smi-th, “Effects of Biodiesel, Biodiesel Blends, and a Syn-thetic Diesel on Emissions from Light Heavy Duty Diesel Vehicles”, Environmental Science & Technology,vol. 34, no. 3, pp. 349-355, 2000. [en línea] Disponible en: http://dx.doi.org/10.1021/es990543c

W. Wang, D. Lyons, N. Clark, M. Gautam, M y P. Norton, “Emissions From Nine Heavy Trucks Fueled by Diesel and Biodiesel Blend Without En-gine Modification”, Environmental Science & Tech-nology, vol. 34, no. 6, pp. 933-939, 2000 [en línea]. Disponible en http://dx.doi.org/10.1021/es981329b

MÉTRICAS
ARTICLE VIEWS: 1029
PDF VIEWS: 4545