Multilayer validation system for the automation of data in a WSN network with IOT devices

Luisa Paz Fernandez; Juan Pablo Ruiz Rosero

doi:10.16925/2357-6014.2021.01.04

Multilayer validation system for the automation of data in a WSN network with IOT devices

Research Articles

https://doi.org/10.16925/2357-6014.2021.01.04

Luisa Paz Fernandez Ver Biografía

Universidad del Cauca

Juan Pablo Ruiz Rosero Ver Biografía

Universidad del Cauca

Introduction: Article resulting from the research "Multilevel validation system with an emphasis on data transmission in a Gateway for the IoT," supported by the Research Line in Internet Applications of the University of Cauca during 2020.

Problem: Bridges between wireless sensor networks (WSN) and the Internet are necessary for the for the operation of IoT devices. However, these networks are made up of weak links that can generate packet loss.

Objective: present an alternative to improve the data transmission validation process given a frame implemented in a previously developed WSN-IoT system.

Methodology: Scientometric review in the WoS and Scopus databases on concepts related to Industry 4.0 (data from 2015 to 2019), IoT and WSN (data from 1990 to 2019), and algorithm generation based on Scrum and test-based development (TDD).

Results: A validation application that captures, analyzes frames, and compares the values of the monitored variables in each layer of the implemented model, and ultimately reports the errors detected in the data transmission.

Conclusion: with the completion of this investigation, the data transmission validation process of the WSN-IoT system was improved, focused on logistics and monitoring, automating the process.

Originality: An alternative to validate the correct transmission of data in a WSN-IoT system is achieved through this research and shown for the first time on trending topics such as industry 4.0, the industrial Internet of things, the supply chain, logistics, and traceability.

Limitations: little research in the area of validation, few and delicate hardware devices, in addition to a high dependence on networks to monitor the performance of the designed application.

Keywords: Internet of Things, validation, data, application, logistics, traceability, wireless sensor network

T. Fernandez-Carames and P. Fraga-Lamas, “A review on human-centered iot-connected smart labels for the industry 4.0,” IEEE access, vol.6, pp. 25939–25957, 2018, doi: 10.1109/ACCESS.2018.2833501

A. Jayaram, “Lean six sigma approach for global supply chain management using industry 4.0 and iiot,” pp. 89–94, 2016. In Proceedings of the 2nd IEEE International Conference on Contemporary Computing and Informatics (IC3I), Amity Univ, Noida, India, Dec 14-17, 2016, doi: 10.1109/IC3I.2016.7917940

B.Lorena, “Industria 4.0 y la gestión de la cadena de suministro: el desafío de la nueva revolución industrial,” Gaceta Sansana, vol.3, pp.1–7, 2017. [Online]. Available: http://publicaciones.usm.edu.ec/index.php/GS/article/view/103/110. Access:2020-02-10.

A. Antonio, “Logística 4.0: El futuro que podemos aprovechar desde hoy.” [Online]. Available: http://t21.com.mx/opinion/columna-invitada/2018/05/07/logistica-40-futuro-que-podemos-aprovechar-hoy#:~:text=A%20lo%20largo%20de%20la,las%20actividades%20del%20ser%20humano.,2018. Access: 2020-02-10.

L. Barreto, A. Amaral, and T. Pereira, “Industry 4.0 implications in logistics: an overview,” vol. 13, (8), pp. 1245–1252, Elsevier science BV, 2017. In Proceedings of the 7th Manufacturing- Engineering-Society International Conference (MESIC), Vigo, Spain, Jun 28-30, 2017, doi: 10.1016/j.promfg.2017.09.045

E. Manavalan and K. Jayakrishna, “A review of internet of things (iot) embedded sustainable supply chain for industry 4.0 requirements,” Computers & Industrial engineering, vol. 127, pp. 925–953, 2019, doi: 10.1016/j.cie.2018.11.030

B. Haverkort and A. Zimmermann, “Smart industry: How ict will change the game!,” IEEE Internet Computing, vol. 21, pp. 8–10, 2017, doi: 10.1109/access.2018.2833501

F. Valente and A. Neto, “Intelligent steel inventory tracking with IoT/RFID,” (6), pp. 158– 163, IEEE, 2017. In Proceedings of the IEEE International Conference on RFID Technology and Application (RFID-TA), Warsaw, POLAND, SEP 20-22, 2017, doi: 10.1109/rfid-ta.2017.8098639

Y. Adalberto and Y. Sepulveda Casadiego, “Internet industrial de las cosas (iiot) y los sistemas ciberfísicos(cps)comomotoresdedesarrollodelaagriculturamundialenla4revolución industrial industrial internet of things (iiot) and cyberphysical systems (cps) as motors of development of world agriculture in the 4th industrial revolution,” pp. 1–16, 2019, doi: 10.13140/rg.2.2.10314.82881

J. Cortés, “Internet industrial de las cosas,” Bit, no. 199, pp. 46–48, 2015. [Online]. Available: https://www.coit.es/sites/default/files/archivobit/pdf/monografico_cortes.pdf

A. Seitz, D. Henze, D. Miehle, B. Bruegge, J. Nickles, and M. Sauer, “Fog computing as enabler for blockchain-based iiot app marketplaces - a case study,” (7), pp. 182–188, IEEE, 2018. In Proceedings of the 5th International Conference on Internet of Things: Systems, Management and Security (IoTSMS), Valencia, Spain, Oct 15-18, 2018, doi: 10.1109/iotsms.2018.8554484

T. Fernandez-Carames, P. Fraga-Lamas, M. Suarez-Albela, and M. A. Diaz-Bouza, “A fog computing based cyber-physical system for the automation of pipe-related tasks in the industry 4.0 shipyard,” Sensors, vol. 18, pp. 1-26, 2018, doi: 10.3390/s18061961

F. Capello, M. Toja, and N. Trapani, “A real-time monitoring service based on industrial inter- net of things to manage agrifood logistics,” International Conference on Information Systems, Logistics and Supply Chain, pp. 1-8, 2016. In Proceedings of the 6th International Conference on Information Systems, Logistics and Supply Chain, ILS 2016, 1 June 2016 through 4 June 2016. [Online]. Available: http://ils2016conference.com/wp-content/uploads/2015/03/ILS2016_FB01_1.pdf

P. Modica, M. Loria, M. Toja, V. Carchiolo, and M. Malgeri, “A geofencing algorithm fit for supply chain management,” pp. 737–746, Institute of Electrical and Electronics Engineers Inc., 2018. In Proceedings of the 2018 Federated Conference on Computer Science and Information Systems, FedCSIS 2018, 9 September 2018 through 12 September 2018, doi: 10.15439/2018f238

J. Molka-Danielsen, P.Engelsetha, and H. Wang, “Large scale integration of wireless sen- sor network technologies for air quality monitoring at a logistics shipping base,” Journal of industrial information integration, vol. 10, pp. 20–28, 2018, doi: 10.1016/j.jii.2018.02.001

Q. Wen, Y. Gao, Z. Chen, and D. Wu, “A blockchain-based data sharing scheme in the sup-ply chain by iiot,” (6), pp. 695–700, IEEE, 2019. In Proceedings of the IEEE International Conference on Industrial Cyber Physical Systems (ICPS), Taipei, Taiwan, May 06-09, 2019, doi: 10.1109/icphys.2019.8780161

J. Sengupta, S. Ruj, and S. Das Bit, “A comprehensive survey on attacks, security issues and blockchain solutions for iot and iiot,” Journal of network and computer applications, vol. 149, p. 102481, 2020, doi: 10.1016/j.jnca.2019.102481

J. Leevinson, V. Vijayaraghavan, and M. Dammodaran, “Blockchain mechanisms as security-enabler for industrial iot applications,” Internet of Things in the industrial sector: security and device connectivity, smart environments, and industry 4.0, pp. 145–162, 2019, doi: 10.1007/978-3-030-24892-5_7

R. Isbell, C. Maple, B. Hallaq, and H. Boyes, “Development of a capability maturity model for cyber security in iiot enabled supply chains,” pp. 1-8, 2019, Institution of Engineering and Technology, 2019. In Proceedings of the Living in the Internet of Things, IoT 2019, 1 May 2019 through 2 May 2019, doi: 10.1049/cp.2019.0128

A. Garrell and L. Guilera, La Industria 4.0 en la sociedad digital. ICG Marge, SL, pp. 1 – 226, 2019. [Online]. Available: https://books.google.com.co/books?id=YnSIDwAAQBAJ

D. Kozma, P. Varga, and C. Hegedus, “Supply chain management and logistics 4.0-a study on arrowhead framework integration,” (5), pp. 12–16, IEEE, 2019. In Proceedings of the 8th International Conference on Industrial Technology and Management (ICITM), Cambridge, England, Mar 02-04, 2019, doi: 10.1109/icitm.2019.8710670

A. Maiti, A. Raza, B. H. Kang, and L. Hardy, “Estimating service quality in industrial internet- of-things monitoring applications with blockchain,” IEEE access, vol. 7, pp. 155489–155503, 2019, doi: 10.1109/access.2019.2948269

M. Ramírez and J. Castro, “Perspectiva de trazabilidad en la cadena de suministros de frutas: un enfoque desde la dinámica de sistemas,” Ingeniería, vol.19, no.2, pp.63–84, 2014, doi: 10.14483/udistrital.jour.reving.2014.2.a03

P. Fraga-Lamas and T. M. Fernandez-Carames, “A review on blockchain technologies for an advanced and cyber-resilient automotive industry,” IEEE access, vol. 7, pp. 17578–17598, 2019, doi: 10.1109/access.2019.2895302

M. Tsatsanis, R. Zhang, and S. Banerjee, “Collision resolution techniques for wireless randomaccess networks without throughput penalities,” vol. 2, pp. 1325–1329, Institute of Electrical and Electronics Engineers Inc., 1998. In Proceedings of the IEEE International Conference on Universal Personal Communications, ICUPC 1998, 5 October 1998 through 9 October 1998, doi: 10.1109/icupc.1998.733708

G. Pujolle, “An autonomic-oriented architecture for the internet of things,” (6), pp. 163– 168, IEEE COMPUTER SOC, 2006. In Proceedings of the IEEE John Vincent Atanasoff International Symposium on Modern Computing, Sofia, BULGARIA, OCT 03-06, 2006, doi: 10.1109/jva.2006.6

S. Balakrishna, M. Thirumaran, and V. Solanki, “Machine Learning based Improved Gaussian Mixture Model for IoT Real-Time Data Analysis,” Ing. Solidar, vol. 16, no. 1, pp.1-30 Jan. 2020, doi: 10.16925/2357-6014.2020.01.02

Android, “Android studio.”[Online]. Available: https://developer.android.com/studio, 2020, p. 1. Access: 2020-03-05.

J. Ruiz-Rosero, G. Ramirez-Gonzalez, and J. Viveros-Delgado, “Software survey: Scientopy, a scientometric tool for topics trend analysis in scientific publications,” Scientometrics, vol. 121, pp. 1165–1188, Nov 2019. [Online]. doi:10.1007/s11192-019-03213-w

J. Ruiz-Rosero, G. Ramirez-Gonzalez, and R. Khanna, “Field Programmable Gate Array Applications—A Scientometric Review,” computation, 7(4), 63, pp. 2-111, doi: https://doi.org /10.3390/computation7040063

[31] T. Hainey, “Information systems development methodologies, techniques & tools,” International Journal of Information Management, vol. 27, no. 1, pp. 58–59, 2007, doi: 10.1016/j.ijinfomgt.2006.09.002

[32] M. Trigas Gallego, “Metodología scrum,” pp. 32-41, 2012. [Online]. Available: http://openaccess.uoc.edu/webapps/o2/bitstream/10609/17885/1/mtrigasTFC0612memoria.pdf

L.Electronics, “Tipos de memoria.”[Online]. Available:https://www.lg.com/es/posventa/microsites/movil/memoria-ram-flash-rom, 2020, p. 1. Access: 2020-03-06.

Libelium, “Libelium permite Smart logistics ofreciendo seguimiento y detección de bienes en tiempo real.”[Online]. Available: http://www.libelium.com/smart-logistics-realtime-geolocation-3g-gps-gprs-tracking-sensing-goods/, 2014, p. 1. Access: 2020-03-16.

O.Rennies, “Deliveries package tracker.”[Online]. Available: https://deliveries.orrs.de, 2020, p. 1. Access: 2020-03-13.

17TRACK, “Seguimiento de paquetes todo-en-uno.” [Online]. Available: https://www.17track.net/es, 2020, p. 1. Access: 2020-03-13.

TrackingLabs, “Parcel tracker.” [Online]. Available: https://play.google.com/store/apps/details?id=com.trackinglabs.parceltracker/, 2019, p. 1. Access: 2020-03-13.

Aconno Gmbh, “Ble sniffer.” [Online]. Available: https://aconno.de/products/ble- sniffer/, 2019, p. 1. Access: 2020-03-15.

[1]

L. Paz Fernandez and J. P. Ruiz Rosero, “Multilayer validation system for the automation of data in a WSN network with IOT devices”, ing. Solidar, vol. 17, no. 1, pp. 1–26, Jan. 2021, doi: 10.16925/2357-6014.2021.01.04.

Download Citation

This work is licensed under a Creative Commons Attribution 4.0 International License.

Cession of rights and ethical commitment

As the author of the article, I declare that is an original unpublished work exclusively created by me, that it has not been submitted for simultaneous evaluation by another publication and that there is no impediment of any kind for concession of the rights provided for in this contract.

In this sense, I am committed to await the result of the evaluation by the journal Ingeniería Solidaría before considering its submission to another medium; in case the response by that publication is positive, additionally, I am committed to respond for any action involving claims, plagiarism or any other kind of claim that could be made by third parties.

At the same time, as the author or co-author, I declare that I am completely in agreement with the conditions presented in this work and that I cede all patrimonial rights, in other words, regarding reproduction, public communication, distribution, dissemination, transformation, making it available and all forms of exploitation of the work using any medium or procedure, during the term of the legal protection of the work and in every country in the world, to the Universidad Cooperativa de Colombia Press.

Issue

Vol. 17 No. 1 (2021)

Published

2021-01-11

Downloads

PDF

XML

Metrics

Metrics Loading ...

https://plu.mx/plum/a/?doi=10.16925/2357-6014.2021.01.04