Transformación digital en sistemas de gestión de calidad en empresas tecnológicas, caso Link Wireless

Johan Stiven Peña Gómez; César  Asdraldo Vargas

doi:10.16925/2357-6014.2022.01.04

Digital Transformation in Quality Management Systems in Technology Companies, Link Wireless Case

Research Articles

https://doi.org/10.16925/2357-6014.2022.01.04

Johan Stiven Peña Gómez Ver Biografía

Universidad Distrital Francisco José de Caldas

César Asdraldo Vargas Ver Biografía

Universidad Distristal Francisco José de Caldas

The following article is the result of a research that describes a model of digital transformation in quality management systems and its applicability in business areas, as is the case of Link Wireless. To verify its applicability, a study was conducted with a qualitative, descriptive and exploratory approach, from which a diagnosis was made where the initial state of the quality management system as established by the ISO 9001: 2015 standard was established. and the technological capacity of the company to design the best strategy that enhances its capabilities to digitize its processes in order to make the most of its software and hardware tools, achieving a model that can ensure the continuity of the operation of the quality management system with the lowest possible cost.

Keywords: processes, digitization, quality, continuous improvement

S. Lee, D. Lee, Y. Sung, “The quality management ecosystem for predictive maintenance in the Industry 4.0 era,” International Journal of Quality Innovation, vol. 5, no 4, 2019. doi: https://doi.org /10.1186/s40887-019-0029-5

G. Petana, C. Rosa, “Digital Transformation and the Impact in Knowledge Management,” Scitepress- Science and Technology Publications, pp.180-187, 2020. doi: https://doi.org /10.5220/0010134001800187

M, Javaida A, Haleema R, Pratap R, Suman “Significance of Quality 4.0 towards comprehen-sive enhancement in manufacturing sector,” Sensors International. vol 2, pp.1-13, 2021. doi: https://doi.org /10.1016/j.sintl.2021.100109

M. Menshikova, Y. Piunova , M. Makhova, “Transformación digital en el sistema de gestión de la calidad”, Conferencia internacional 2019. In Conferencia internacional 2019 “Gestión de la calidad, transporte y seguridad de la información, tecnologías de la información”, pp. 42-46, 2019. doi: https://doi.org /10.1109/ITQMIS.2019.8928438

S. Schrauf, P, Berttram, Industry 4.0. How digitization makes the supply chain more efficient, agile, and customer-focused: PWC, pp.1-32, 2016. [Online], Available: https://www.pwc.ch/en/publications/2017/how-digitization-makes-the-supply-chain-more-efficient-pwc-2016.pdf

I.A. Guerra, “La transformación digital de la empresa”, tesis Universidad de Cantabria, pp. 1-29, 2017. [Online]. Available: https://repositorio.unican.es/xmlui/bitstream/handle/10902/13402/ALONSOGUERRAIVAN.pdf

M. Menéndez, “Análisis del proceso de transformación digital de una empresa industrial del sector Utility”. Universidad Pontificia Comillas, Madrid, pp.1-120 jun.2019. [Online], Available: https://repositorio.comillas.edu/xmlui/bitstream/handle/11531/36347/TFM%20-% 20Menendez%20Botella%2C%20Marta.pdf?sequence=2&isAllowed=y

A. Cifuentes, “Implementación de herramientas tecnológicas y digitales para optimizar los procesos de orden y control del área logística y comercial de la empresa Chispa y Sabor”, Fundación Universitaria Empresarial de la Cámara de Comercio. Bogotá D.C, pp. 1-64, 2019. [Online]. Available: https://bibliotecadigital.ccb.org.co/bitstream/handle/11520/23911/An gie%20Natalia%20Cifuentes%20Mogoll%c3%b3n..pdf?sequence=1&isAllowed=y

M.C Gama, P. Parrado “Plan de Medios Digitales para la empresa ACSE Tecnology en Villavicencio”, Universidad Cooperativa de Colombia, Villavicencio pp. 1-43, 2019. [Online]. Available: http://hdl.handle.net/20.500.12494/12945.

P. Verhoef, T Broekhuizena, Y. Bartb, A. Bhattacharyaa, J. Qi Dong, N. Fabian y M. Haenlein, “Digital transformation: A multidisciplinary reflection and research agenda,” Journal of Business Research, vol 122, pp. 889-901. doi: https://doi.org/10.1016/j.jbusres.2019.09.022

J. Ting, Digital Transformation in Process industries. Digital Customer Experience, Digital Platform Center, Yokogawa Electric International Pte. Ltd, vol. 64, no 1, pp.1-6, 2021.

F. Vacas, Transformación digital: del lifting a la reconversión. CEF no 10, pp. 135-143, 2018. doi: https://doi.org/10.51302/tce.2018.199

J.M Briand, Digitalización de los sistemas de Calidad y HSE- BlueKanGo, 2019. [Online]. Available: https://cdn2.hubspot.net/hubfs/2302063/Guides%20et%20rapports/2018/ES/ 2018_ES%20Guide_Digitalisation%20HSE%20Qualit%C3%A9.pdf.

Y. Morales, Digital Business como herramienta estratégica de Marketing para incrementar la demanda de las Mipymes del sector calzado de Bogotá. Universidad Cooperativa de Colombia, Bogotá D.C, pp. 1-31,2019. [Online]. Available from: http://hdl.handle.net/20.500.12494/15713

J. Berbegal, F. Marimon, M. Casadesús, P. Sampaio, Proceeding’s book of the 3rd International Conference on Quality Engineering and Management. In International Conference on Quality Engineering and Management, pp. 605-613, 2018. [Online]. Available: http://hdl.handle.net/10174/28976.

D.P Castellanos, D.M Velasquez, Plan de mejora para la transformación digital en una em-presa de telecomunicaciones. Universidad Externado de Colombia, pp.1-83, 2018 [Online]. Available: https://bdigital.uexternado.edu.co/bitstream/handle/001/764/ALA-Spa-2018-Plan_de_mejora_para_la_transformaci%F3n_digital_en%20una_empresa_Trabajo.pdf; jsessionid=F1CB12AFE2F474AB6787572C59467189?sequence=1

H. Nachit, L. Belhcen, “Digital Transformation in Times of Covid-19 Pandemic: The Case of Morocco,” SSRN Electronic Journal, pp.1-17, 2020. doi: http://dx.doi.org /10.2139/ssrn.3645084.

Mckinsey y Company, pp.1-9, oct. 2020 [Online]. Available: https://www.mckinsey.com/business-functions/strategy-and-corporate-finance/our-insights/how-covid-19-has-pus-hed-companies-over-the-technology-tipping-point-and-transformed-business-forever.

C. Ralea, O.C Dobrin, C. Barbu, C. Tanase, Looking of the future: digital transformation of quality management. In Proceedings of the 13th International Management Conference; Bucharest, Romania, vol 13.pp. 121-132, 2019.

L. Koskela, A. Tezel, V. Patel, Theory of Quality Management: its Origins and History. In F.R. PCaH, editor. Proc. 27 Annual Conference of the International. Group for Lean Construction (IGLC); Dublin, Ireland. pp. 1381-1390, 2019. doi: https://doi.org/10.24928/2019/0259

S.J. Andrle, Total, Quality Management in Public Transportation. Transit Cooperative Research Program, no 3, pp.1-39, oct.1994.

A. Ferreira, D. Otley, “The design and use of performance management systems: An extended framework for analysis,” Management Accounting Research, vol. 20, no 4, pp. 263-282, 2009. doi: https://doi.org/10.1016/j.mar.2009.07.003

K. Hendricks, V. Singhal, “Firm characteristics, total quality management, and financial per-formance,” Journal of Operations Management, pp. 1-17, 2001. doi: https://doi.org/10.1016/S0272-6963(00)00049-8

Z. Karimi, “Quality Management Systems and Organizational Performance: A Theoretical Review in Kenya’s Public Sect or Organizations,” Science Journal of Business and Management, vol.4, pp. 150-155, 2016. doi: https://doi.org/10.11648/J.SJBM.20160405.12

T. Fontalvo, E. De la Hoz, Diseño e Implementación de un Sistema de Gestión de la Calidad ISO 9001:2015 en una Universidad Colombiana. vol. 11, no 1, pp.35-44, 2018, doi: http://dx.doi.org/10.4067/S0718-50062018000100035.

L. Fonseca, ISO 9001 Quality Management Systems through the Lens. Quality access to suc-cess, vol. 16, no 148, pp.54-59, 2015.

K. López, A. Roa, Desarrollo de un sistema de gestión de calidad en la compañia tecnologica predictiva Kontrolar T. P. K Ltda. bajo los lineamientos de la NTC ISO 9001:2015, Universidad Libre, Bogotá D.C, pp.1-261, 2016.

Wireless. Link Wireless, 2020. [Online], Available: https://www.linkwireless.net/nosotros/.

N. Nutz, M. Sievers, Guía general para el desarrollo de cadenas de valor. Como crear em-pleo y mejores condiciones de trabajo en sectores objetivos: Organización Internacional del Trabajo, pp. 1-31, 2016.

J. McGee, value chain. In Wiley Encyclopedia of Management. 3rd ed, John Wiley & Sons, vol.12, pp.5, 2014.

M. E Libera, J. Belmonte, “Ideas and Opportunities for Entrepreneurship through the Value Chains,” Revista Ingeniería Solidaria, vol.11, no 18, pp.115-122, 2015. doi: https://doi.org/10.16925/issn.1900-3102

D. Kumar, P.V. Rajeev, “Value Chain: a conceptual framework,” International Journal of Engineering and Management Sciences, vol.7, pp. 74-77, 2016

M. Rachinger, R. Rauter, C. Müller, W. Vorraber y E. Schirgi, “Digitalization and its influence on business model innovation,” Journal of Manufacturing Technology Management, vol.30, pp. 74-77, 2018. doi: https://doi.org/10.1108/JMTM-01-2018-0020

J. Gray, B. Rumpe, “Models for digitalization,” Software & Systems Modeling, vol.14, pp.1319-132, 2015. doi: https://doi.org/10.1007/s10270-015-0494-9

J. Pereira, “El control de calidad en los planes de digitalización,” Revista PH 95, 2018. doi: ht-tps://doi.org/10.33349/2018.0.4226

A.E. Sánchez, “La gestión de documentos como estrategia de innovación empresarial,” Revista Venezolana de Información, Tecnología y Conocimiento, vol.11, no 2, pp.25-50, 2014

D. Winkler, M. Sabou, S. Biffl, “Improving Quality Assurance in Multidisciplinary Engineering Environments with Semantic Technologies,” Quality Control and Assurance - An Ancient Greek Term Re-Mastered, pp.379-398, feb. 2017. doi: https://doi.org/10.5772/66222

M. Trimbak, J. Bagi, “Quality improvent through authomation of product design process in a manufacturing organization,” International Journal for Quality Research, pp.505-5014, ene. 2011.

K. Židek, V. Modrák, J. Pitel y Z. Šoltysová, “The Digitization of Quality Control Operations with Cloud Platform Computing Technologies,” Industry 4.0 for SMEs, pp. 305-334, ene.2020.

T. Gorensek, A. Kohont, “Conceptualization of digitalization: opportunities and challenges for organizations in the Euro- Mediterranean area,” International Journal of Euro-Mediterranean Studies, vol. 11, no 2, pp. 93-115,2018.

M. Hans, A. Birch, I. Gremyr, J. Martin, “Digitalisation and quality management: problems and prospects,” Production Planning and Control, vol. 32, no 12, 2021.

A. Carvalho, P. Sampaio, E. Rebentisch, J. Oehmen, Technology and Quality Management: a review of concepts and opportunities in the Digital Transformation. In Conference: International Conference on Quality Engineering and Management, sept. 2020.

N. Mohd, S. Mat, R. Anak, S. Ayub, “Digitization of Records and Archives: Issues and concerns,” International Journal of Academic Research in Business and social sciences, vol.8, no 9, pp. 170-178, 2018.

M. Andreessen, How Software is powering the Hardware Renaissance: The state of sftware monetization pp, 1-19, 2020. [Online], Available: https://www3.thalesgroup.com/hardwa-re-to-software/pdf/report.pdf

G. Rodriguez, G. Bribiesca, “Modelo de Transformación Digital en las Empresas”. In XXXII Congreso Nacional y XVIII Congreso Internacional de Informática y Computación de la ANIEI; Puebla, pp.1-8, oct.2019.

CEIB, La transformación digital. In Actividad enmarcada en las reuniones preparatorias del XIII encuentro empresarial iberoamericano, en el marco de la XVII cumbre iberoamericana de jefes de Estado y de Gobierno de Andorra; Madrid, pp.1-98, 2021. [Online]. Available: http://www.andi.com.co/Uploads/INFTD.pdf

M.S. Bhatia, S. Kumar, “Critical Success Factors of Industry 4.0 in Automotive Manufacturing Industry,” IEE Transactions on Engineering Management, pp.1-15, sept.2020. doi: https://doi.org / 10.1109/TEM.2020.3017004

P. Palos, A. Reyes, R. Saura, “Modelos de Adopción de Tecnologías de la Información y Cloud Computing en las Organizaciones”, vol.30, no 3, junio. 2019. doi: http://dx.doi.org /10.4067/S0718-07642019000300003.

S.M. Fierro, R. Medina, Procesos de Transformación digital para un proveedor de servicios cloud en Colombia, Gerencia Estratégica de Tecnologías de la Información, Universidad Externado de Colombia, Bogotá D.C, pp.1-117, 2019. [Online]. Available: https://bdigital.uexternado.edu.co/bitstream/handle/001/2454/ABCBA-spa-2019-Proceso_de_transformacion_digital_para_un_proveedor_de_servicios_cloud_en_Colombia?sequence=1&isAllowed=y

Pacheco A. Propuesta de Implementación de la Industria 4.0 en el sector manufacture-ro de Bogotá. Universidad Católica de Colombia, Bogotá D. C, pp.1-72, 2020. [Online]. Available: https://repository.ucatolica.edu.co/bitstream/10983/25322/1/PROPUESTA%20DE%20IMPLEMENTACI%C3%93N%20DE%20LA%20INDUSTRIAL%204.0%20EN%20EL%20SECTOR%20MANUFACTURERO%20DE%20BOGOT%C3%81.pdf

Carvajal Tecnología y Servicios, Los retos de la reinvención digital, 2020 [Online] Available: https://www.carvajal.com/index.php/los-retos-de-una-reinvencion-digital/.

La Patria, Alsus Group, con el software de la innovación, 2014. [Online]. Available from: ht-tps://www.lapatria.com/negocios/alsus-group-con-el-software-de-la-innovacion-129191.

[1]

J. S. Peña Gómez and C. . Asdraldo Vargas, “Digital Transformation in Quality Management Systems in Technology Companies, Link Wireless Case”, ing. Solidar, vol. 18, no. 1, pp. 1–29, Jan. 2022, doi: 10.16925/2357-6014.2022.01.04.

Download Citation

This work is licensed under a Creative Commons Attribution 4.0 International License.

Cession of rights and ethical commitment

As the author of the article, I declare that is an original unpublished work exclusively created by me, that it has not been submitted for simultaneous evaluation by another publication and that there is no impediment of any kind for concession of the rights provided for in this contract.

In this sense, I am committed to await the result of the evaluation by the journal Ingeniería Solidaría before considering its submission to another medium; in case the response by that publication is positive, additionally, I am committed to respond for any action involving claims, plagiarism or any other kind of claim that could be made by third parties.

At the same time, as the author or co-author, I declare that I am completely in agreement with the conditions presented in this work and that I cede all patrimonial rights, in other words, regarding reproduction, public communication, distribution, dissemination, transformation, making it available and all forms of exploitation of the work using any medium or procedure, during the term of the legal protection of the work and in every country in the world, to the Universidad Cooperativa de Colombia Press.

Issue

Vol. 18 No. 1 (2022)

Published

2022-01-11

Downloads

PDF

How to Cite

[1]

Download Citation

Metrics

Metrics Loading ...

https://plu.mx/plum/a/?doi=10.16925/2357-6014.2022.01.04