Global analysis of the environmental management of hazardous industrial wastes

[1] A. Kumar et al., “A critical review on sustainable hazardous waste management strategies: a step towards a circular economy,” Environ. Sci. Pollut. Res., vol. 30, no. 48, pp. 105030–105055, 2023, doi: https://doi.org/10.1007/s11356-023-29511-8

[2] I. M. Bamatov et al., “Industrial waste disposal: Development of new technologies and economic mechanisms of management,” Int. J. Recent Technol. Eng., vol. 8, no. 3, pp. 7944–7949, 2019. [Online]. Available: https://dspace.kpfu.ru/xmlui/handle/net/156820

[3] S. R. Naqvi, B. Beig, and M. Naqvi, “Circular economy approach to address the industrial solid waste management,” in Handbook of Solid Waste Management: Sustainability through Circular Economy, Singapore: Springer Nature Singapore, 2022, pp. 421–440. doi: https://doi.org/10.1007/978-981-16-4230-2_62

[4] U. Suksanguan et al., “Structural equation model of factors influencing the selection of industrial waste disposal service in cement kilns,” Sustainability, vol. 14, no. 7, p. 4109, 2022, doi: https://doi.org/10.3390/su14074109

[5] J. M. Mesa-Fernández et al., “Methodology for industrial solid waste management: Implementation to sludge management in Asturias (Spain),” Waste Manag. Res., vol. 32, no. 11, pp. 1103–1112, 2014, doi: https://doi.org/10.1177/0734242x14552552

[6] R. Chandrappa and D. B. Das, “Waste from industry and commercial activity,” in Solid Waste Management: Principles and Practice, Cham: Springer International Publishing, 2024, pp. 369–420. doi: https://doi.org/10.1007/978-3-031-50442-6_9

[12] J. Yan et al., “Thermal treatment techniques: incineration, gasification, and pyrolysis,” in Sustainable Solid Waste Management, 2016, pp. 149–185, doi: https://doi.org/10.1061/9780784414101.ch07

[13] S. Krishnan et al., “Current technologies for recovery of metals from industrial wastes: An overview,” Environ. Technol. Innov., vol. 22, p. 101525, 2021, doi: https://doi.org/10.1016/j.eti.2021.101525

[14] J. Jayamuthunagai et al., “Valorization of industrial wastes for biofuel production: Challenges and opportunities,” in Biomass, Biofuels, Biochemicals, A. Pandey, R. D. Tyagi, and S. Varjani, Eds., Elsevier, 2021, pp. 231–245. doi: https://doi.org/10.1016/B978-0-12-821878-5.00010-6

[15] X. Lin et al., “A review on carbon storage via mineral carbonation: Bibliometric analysis, research advances, challenge, and perspectives,” Sep. Purif. Technol., p. 126558, 2024, doi: https://doi.org/10.1016/j.seppur.2024.126558

[16] D. M. Rodrigues, M. F. da Silva, F. L. C. Almeida, A. H. F. de Mélo, M. B. S. Forte, C. Martín, H. D. S. Barud, H. M. Baudel, and R. Goldbeck, “A green approach to biomass residue valorization: Bacterial nanocellulose production from agro-industrial waste,” Biocatalysis and Agricultural Biotechnology, p. 103036, 2024, doi: https://doi.org/10.1016/j.bcab.2024.103036

[17] Z. Wang, D. Yan, and L. Wang, “Research Status and Development Trend Analysis of Hazardous Waste Pollution Prevention Technology Based on Bibliometrics,” Environmental Sanitation Engineering, vol. 31, no. 5, pp. 73–85, 2023. [Online]. Available: http://www.srhj.org.cn/EN/Y2023/V31/I5/73

[18] F. Aliyah, I. Kambali, A. F. Setiawan, Y. M. Radzi, and A. A. Rahman, “Utilization of steel slag from industrial waste for ionizing radiation shielding concrete: A systematic review,” Construction and Building Materials, vol. 382, p. 131360, 2023, doi: https://doi.org/10.1016/j.conbuildmat.2023.131360

[19] A. B. Botelho-Junior, J. A. S. Tenório, and D. C. R. Espinosa, “Separation of critical metals by membrane technology under a circular economy framework: A review of the state-of-the-art,” Processes, vol. 11, no. 4, p. 1256, 2023, doi: https://doi.org/10.3390/pr11041256

[20] X. Hu et al., “Mapping the research on desulfurization wastewater: Insights from a bibliometric review (1991–2021),” Chemosphere, vol. 314, p. 137678, 2023, doi: https://doi.org/10.1016/j.chemosphere.2022.137678

[21] G. Mao, H. Hu, X. Liu, J. Crittenden, and N. Huang, “A bibliometric analysis of industrial wastewater treatments from 1998 to 2019,” Environmental Pollution, vol. 275, p. 115785, 2021, doi: https://doi.org/10.1016/j.envpol.2020.115785

[22] A. T. Ubando, A. D. M. Africa, M. C. Maniquiz-Redillas, A. B. Culaba, W. H. Chen, and J. S. Chang, “Microalgal biosorption of heavy metals: a comprehensive bibliometric review,” Journal of Hazardous Materials, vol. 402, p. 123431, 2021, doi: https://doi.org/10.1016/j.jhazmat.2020.123431

[23] M. P. Jiménez-Castro, L. S. Buller, W. G. Sganzerla, and T. Forster-Carneiro, “Bioenergy production from orange industrial waste: a case study,” Biofuels, Bioproducts and Biorefining, vol. 14, no. 6, pp. 1239–1253, 2020, doi: https://doi.org/10.1002/bbb.2128

[24] P. Yang, L. J. Zhang, X. J. Wang, and Z. L. Wang, “Exploring the management of industrial hazardous waste based on recent accidents,” Journal of Loss Prevention in the Process Industries, vol. 67, p. 104224, 2020, doi: https://doi.org/10.1016/j.jlp.2020.104224

[25] Z. Zhang et al., “Insight into the impact of industrial waste co-disposal with MSW on groundwater contamination at the open solid waste dumping sites,” Chemosphere, vol. 344, p. 140429, 2023, doi: https://doi.org/10.1016/j.chemosphere.2023.140429

[26] C. Yan et al., “Highly efficient catalytic ozonation degradation of levofloxacin by facile hydrogenation-modified red mud wastes,” Environmental Pollution, vol. 334, p. 122149, 2023, doi: https://doi.org/10.1016/j.envpol.2023.122149

[27] Q. Kanwal, J. Li, and X. Zeng, “Mapping recyclability of industrial waste for anthropogenic circularity: a circular economy approach,” ACS Sustainable Chemistry & Engineering, vol. 9, no. 35, pp. 11927–11936, 2021, doi: https://doi.org/10.1021/acssuschemeng.1c04139

[28] S. Gowthaman and T. Selvaraju, “Efficient integration of electrocoagulation treatment with the spray-pyrolyzed activated carbon coating on stainless steel electrodes for textile effluent-bath reuse with ease,” Water Environment Research, vol. 95, no. 10, p. e10938, 2023, doi: https://doi.org/10.1002/wer.10938

[29] S. Gupta and S. Chaudhary, “Use of fly ash for the development of sustainable construction materials,” in New Materials in Civil Engineering, pp. 677–689, Butterworth-Heinemann, 2020, doi: https://doi.org/10.1016/B978-0-12-818961-0.00021-1

[30] K. Packrisamy and K. Jayakumar, “Fly ash and ceramic tile industrials waste: landfills to construction materials,” Clean Technologies and Environmental Policy, vol. 25, no. 10, pp. 3247–3261, 2023, doi: https://doi.org/10.1007/s10098-023-02624-x

[31] L. G. L. M. Edirisinghe, A. A. P. de Alwis, S. Prakash, M. Wijayasundara, and N. A. Hemali, “A volume-based analysis method to determine the economic value of mixed industrial waste,” Cleaner Environmental Systems, vol. 11, p. 100142, 2023, doi: https://doi.org/10.1016/j.cesys.2023.100142

[32] K. Rani and K. Senthil, “Potential of industrial waste and plastic nanomaterials as a danger or a way to create a sustainable environment: a critical review,” Nanotechnology for Environmental Engineering, vol. 8, no. 4, pp. 879–890, 2023, doi: https://doi.org/10.1007/s41204-023-00330-z

[33] X. Zhao, R. Webber, P. Kalutara, W. Browne, and J. Pienaar, “Construction and demolition waste management in Australia: A mini-review,” Waste Management & Research, vol. 40, no. 1, pp. 34–46, 2022, doi: https://doi.org/10.1177/0734242X211029446

[34] S. Sadala et al., “Resource recovery as alternative fuel and raw material from hazardous waste,” Waste Management & Research, vol. 37, no. 11, pp. 1063–1076, 2019, doi: https://doi.org/10.1177/0734242X19854124

[35] S. K. Verma, R. Gupta, A. Singhal, and A. Devi, “Utilization of Industrial Waste as a fertilizer in Ornamental Plants,” [Online]. Available: http://dspace.bits-pilani.ac.in:8080/xmlui/handle/123456789/2240

[36] A. Kaur, “Approaches to Agro-industrial Solid Waste Disposal and Bioenergy Generation,” in Advances in Environmental Biotechnology, R. Kumar, A. Sharma, and S. Ahluwalia, Eds., Springer, Singapore, 2017, pp. 1, doi: https://doi.org/10.1007/978-981-10-4041-2_11

[37] S. Srikanth, M. Kumar, and S. K. Puri, “Bio-electrochemical system (BES) as an innovative approach for sustainable waste management in petroleum industry,” Bioresource Technology, vol. 265, pp. 506–518, 2018, doi: https://doi.org/10.1016/j.biortech.2018.02.059

[38] D. Lee, J. Kim, and H. S. Park, “Characteristics of industrial hazardous waste generation in South Korea from 2008 to 2018 based on decoupling and decomposition analysis,” Waste Management & Research, vol. 40, no. 8, pp. 1322–1331, 2022a, doi: https://doi.org/10.1177/0734242X211063728

[39] D. Lee, J. Kim, and H. S. Park, “Characterization of industrial hazardous waste generation in South Korea using input-output approach,” Resources, Conservation and Recycling, vol. 183, p. 106365, 2022b, doi: https://doi.org/10.1016/j.resconrec.2022.106365

[40] D. Lee, J. Kim, G. Sonnemann, and H. S. Park, “Identifying the socioeconomic determinants of industrial hazardous waste generation: South Korea as a case study,” Science of The Total Environment, vol. 901, p. 166525, 2023, doi: https://doi.org/10.1016/j.scitotenv.2023.166525

[41] Z. Khan, S. T. H. Shah, and D. Murodov, “Poor Industrial and Domestic Wastewater Management in Developing Countries, Resulting in Depleting Drinkable Water Resources: a Geophysical and Hydrochemical Application,” Water, Air, & Soil Pollution, vol. 234, no. 12, p. 758, 2023, doi: https://doi.org/10.1007/s11270-023-06765-z

[42] N. Ahmad, M. Usman, H. R. Ahmad, M. Sabir, Z. U. R. Farooqi, and M. T. Shehzad, “Environmental implications of phosphate-based fertilizer industrial waste and its management practices,” Environmental Monitoring and Assessment, vol. 195, no. 11, p. 1326, 2023, doi: https://doi.org/10.1007/s10661-023-11958-4

[43] P. Usapein and O. Chavalparit, “Development of sustainable waste management toward zero landfill waste for the petrochemical industry in Thailand using a comprehensive 3R methodology: A case study,” Waste Management & Research, vol. 32, no. 6, pp. 509–518, 2014, doi: https://doi.org/10.1177/0734242X14533604

[44] S. Thongkong, S. Worawattanaparinya, and T. Silpcharu, “Guidelines for Effective Industrial Waste Management of the Industrial Business Sectors,” Asian Journal of Water, Environment and Pollution, vol. 19, no. 3, pp. 51–57, 2022, doi: https://doi.org/10.3233/AJW220039

[45] M. Yamanaka, T. Hachimura, and S. Hasegawa, “Distribution of landfill by geophysical exploration methods at illegal industrial wastes disposal site,” GEOMATE Journal, vol. 9, no. 17, pp. 1342–1347, 2015.

[46] M. Farzadkia et al., “Evaluation of industrial wastes management practices: Case study of the Savojbolagh industrial zone, Iran,” Waste Management & Research, vol. 38, no. 1, pp. 44–58, 2019, doi: https://doi.org/10.1177/0734242X19865777

[47] A. A. Shayesteh et al., “Industrial waste management using the rapid impact assessment matrix method for an industrial park,” Global Journal of Environmental Science and Management, vol. 6, no. 2, pp. 261–274, 2020, doi: https://doi.org/10.22034/gjesm.2020.02.10

[48] B. Xu, J. Qin, and Y. Yi, “Use of ladle slag for CO₂ sequestration and zinc immobilization,” Resources, Conservation and Recycling, vol. 199, p. 107220, 2023, doi: https://doi.org/10.1016/j.resconrec.2023.107220

[49] C. H. Tsai, Y. H. Shen, and W. T. Tsai, “Sustainable material management of industrial hazardous waste in Taiwan: Case studies in circular economy,” Sustainability, vol. 13, no. 16, p. 9410, 2021, doi: https://doi.org/10.3390/su13169410.

[50] T. T. Wondim et al., “Wastewater treatment plant performance assessment using time-function-based effluent quality index and multiple regression models: the case of Bahir Dar textile factory,” Environmental Monitoring and Assessment, vol. 195, no. 11, p. 1360, 2023, doi: https://doi.org/10.1007/s10661-023-11952-w

[51] D. M. Yacout y M. S. Hassouna, “Identifying potential environmental impacts of waste handling strategies in textile industry,” Environmental Monitoring and Assessment, vol. 188, pp. 1–13, 2016, doi: https://doi.org/10.1007/s10661-016-5443-8

[52] D. G. Bassyouni, M. H. Abdel-Aziz, E. Z. El-Ashtoukhy, G. H. Sedahmed, e I. A. El-Gheriany, “Electrocoagulation for Cyanide Removal from Industrial Waste Solutions: an Innovative Cell Design and Optimization Using Response Surface Methodology,” Water, Air, & Soil Pollution, vol. 234, no. 11, p. 674, 2023, doi: https://doi.org/10.1007/s11270-023-06691-0

[53] L. Sefouhi y L. Bahmed, “Risk assessment of industrial waste: case of an Algerian company,” Case Studies in the Environment, vol. 7, no. 1, p. 2001786, 2023, doi: https://doi.org/10.1525/cse.2023.2001786

[54] Y. Schoeman, P. Oberholster, y V. Somerset, “A decision-support framework for industrial waste management in the iron and steel industry: A case study in Southern Africa,” Case Studies in Chemical and Environmental Engineering, vol. 3, p. 100097, 2021, doi: https://doi.org/10.1016/j.cscee.2021.100097

[55] L. J. McDonald et al., “Synergy between industry and agriculture: Techno-economic and life cycle assessments of waste recovery for crop growth in glasshouses,” Journal of Cleaner Production, vol. 432, p. 139650, 2023, doi: https://doi.org/10.1016/j.jclepro.2023.139650

[56] M. Chalaris et al., “Advancements and sustainable strategies for the treatment and management of wastewaters from metallurgical industries: an overview,” Environmental Science and Pollution Research, vol. 30, no. 57, pp. 119627–119653, 2023, doi: https://doi.org/10.1007/s11356-023-30891-0

[57] J. J. Mascarell et al., “Production of crude oil from industrial wastes and wastewaters by hydrothermal liquefaction,” Journal of Material Cycles and Waste Management, vol. 25, no. 6, pp. 3476–3489, 2023, doi: https://doi.org/10.1007/s10163-023-01771-z

[58] M. A. Riera, S. Maldonado, y R. Palma, “Multicriteria analysis and GIS applied to the selection of agroindustrial waste. A case study contextualized to the Ecuadorian reality,” Journal of Cleaner Production, vol. 429, p. 139505, 2023, doi: https://doi.org/10.1016/j.jclepro.2023.139505

[59] V. D. Muñoz-Soto et al., “COVID-19, waste production and municipal recycling programs: Insights from Chile to the global south,” Science of The Total Environment, vol. 899, p. 165388, 2023, doi: https://doi.org/10.1016/j.scitotenv.2023.165388

[60] M. F. Muñoz-Vélez et al., “Circular Economy: Adding Value to the Post-Industrial Waste through the Transformation of Aluminum Dross for Cement Matrix Applications,” Sustainability, vol. 15, no. 18, p. 13952, 2023, doi: https://doi.org/10.3390/su151813952

[61] O. Mendieta, L. Castro, J. Rodríguez, y H. Escalante, “Management and valorization of waste from a non-centrifugal cane sugar mill via anaerobic co-digestion: Technical and economic potential,” Bioresource Technology, vol. 316, p. 123962, 2020, doi: https://doi.org/10.1016/j.biortech.2020.123962

[62] L. M. Machado et al., “Simultaneous production of mesoporous biochar and palmitic acid by pyrolysis of brewing industry wastes,” Waste Management, vol. 113, pp. 96–104, 2020, doi: https://doi.org/10.1016/j.wasman.2020.05.038

[63] C. F. Valdés et al., “Co-gasification and co-combustion of industrial solid waste mixtures and their implications on environmental emissions, as an alternative management,” Waste Management, vol. 101, pp. 54–65, 2020, doi: https://doi.org/10.1016/j.wasman.2019.09.037

[64] M. J. Page et al., “Updating guidance for reporting systematic reviews: development of the PRISMA 2020 statement,” Journal of Clinical Epidemiology, vol. 134, pp. 103–112, 2021, doi: https://doi.org/10.1016/j.jclinepi.2021.02.003

[65] N. Donthu et al., “How to conduct a bibliometric analysis: An overview and guidelines,” Journal of Business Research, vol. 133, pp. 285–296, 2021, doi: https://doi.org/10.1016/j.jbusres.2021.04.070

[66] I. Passas, “Bibliometric Analysis: The Main Steps,” Encyclopedia, vol. 4, no. 2, pp. 1014–1025, 2024, doi: https://doi.org/10.3390/encyclopedia4020065

[67] O. Öztürk, R. Kocaman, y D. K. Kanbach, “How to design bibliometric research: an overview and a framework proposal,” Review of Managerial Science, vol. 14, p. 1, 2024, doi: https://doi.org/10.1007/s11846-024-00738-0

[68] R. Pranckutė, “Web of Science (WoS) and Scopus: The titans of bibliographic information in today’s academic world,” Publications, vol. 9, no. 1, p. 12, 2021, doi: https://doi.org/10.3390/publications9010012

[69] K. E. Villanueva-Jimenez et al., “Gestión de residuos sólidos y la contaminación ambiental en las empresas industriales: una revisión de la literatura científica entre 2011–2020,” Polo del Conocimiento, vol. 7, no. 5, pp. 79–92, 2022, doi: https://doi.org/10.23857/pc.v7i5.3946

[70] J. Tineo-Machado y Y. M. Valiente-Saldaña, “Manejo de residuos sólidos para reducir la contaminación del medio ambiente: Revisión sistemática,” Ciencia Latina Revista Científica Multidisciplinar, vol. 6, no. 4, pp. 578–601, 2022, doi: https://doi.org/10.37811/cl_rcm.v6i4.2605

[71] J. A. Galvis-González, “Residuos sólidos: problema, conceptos básicos y algunas estrategias de solución,” Revista Gestión y Región, no. 22, pp. 101–119, 2016. [Online]. Available: https://revistas.ucp.edu.co/index.php/gestionyregion/article/view/149

[72] O. Dziubaniuk, M. Ivanova-Gongne, y E. Berdysheva, “Challenges of network interaction in managing sustainable development projects in developing countries: case of an international consulting company,” Critical Perspectives on International Business, vol. 18, no. 4, pp. 546–573, 2022, doi: https://doi.org/10.1108/cpoib-08-2020-0115

[73] E. A. B. Cárcamo y R. Peñabaena-Niebles, “Opportunities and challenges for the waste management in emerging and frontier countries through industrial symbiosis,” Journal of Cleaner Production, vol. 363, p. 132607, 2022, doi: https://doi.org/10.1016/j.jclepro.2022.132607

[74] M. Margallo et al., “Enhancing waste management strategies in Latin America under a holistic environmental assessment perspective: A review for policy support,” Science of the Total Environment, vol. 689, pp. 1255–1275, 2019, doi: https://doi.org/10.1016/j.scitotenv.2019.06.393

[75] P. Vanegas et al., “E-waste management in Ecuador, current situation and perspectives,” en Handbook of Electronic Waste Management, pp. 479–515, Butterworth-Heinemann, 2020, doi: https://doi.org/10.1016/B978-0-12-817030-4.00013-9