Analysis of the changes in the mechanical properties of subrasant materials by the addition of recycled polymeric materials
Introduction: This review is a compilation of several researches. However, it is based on a thesis called “Análisis de la resistencia y durabilidad de un suelo cemento adicionando material no biodegradable polietileno malla Raschel (polisombra) reciclada en diferentes porcentajes en relación con el peso del suelo”, that was carried out at Universidad de La Salle in 2016.
Problem: The identification of the variations in the mechanical properties of materials of subgrade by the addition of polymeric materials.
Objective: to compile the main research on the modifications of subgrade properties through the addition of natural and synthetic fibers, in order to have a theoretical basis that justifies the application of these additions at constructive level.
Methodology: Relevant references compilation referring to the modification of subgrade with polymers and the evaluation of the change in his mechanical properties, synthesis, and discussion of results.
Result: 65% of the investigations correspond to studies on changes in compressive strength, 30% of them are directed to focused studies to study the efforts of traction’s answer when they are polymeric fibers, and the other 5% evaluates properties as the fatigue or resistance to the axial tension.
Conclusions: A considerable increase in the resistance of compression is denoted, which changes according to the type or material to mixing with the soil and cement.
Originality: This article presents the substitution of raw materials of the subgrade with recycled natural or synthetic fibers.
Limitations: there are few researches made with natural fibers, so it is limited to the information found.
C. J. Toirac, “El suelo cemento como un material de construcción”, Ciencia y sociedad, vol. XXXIII, n.° 4, pp. 41-63, 2008. doi: http://dx.doi.org/10.22206/cys.2008.v33i4.
M. P. Gatani, “Ladrillos de suelo-cemento: Mampuesto tradicional en base a un material sostenible”, Informes de la construcción, n.° 51, pp. 35-47, 2000 [En línea]. Disponible en: https://doaj.org/article/bf58955688a040feae79f1bf9b237573.
P. P. Raj, “Ground improvement techniques”, National Conference on Advances in Geotechnical Engineering, pp. 35-42, 2005. doi: https://10.13140/RG.2.1.4865.4965.
Y. Laurente Ronceros, Estudio comparativo del mejoramiento de la subrasante y base de la carretera Cañete-Chupaca tramo Km 220+000 - Km 240-000. Lima: Universidad Nacional de Ingeniería, Lima, 2011. Recuperado: http://cybertesis.uni.edu.pe/handle/uni/3483.
J. B. Hernández-Zaragoza, J. Horta Rangel, V. Castaño, A. Coronado y A. Teresa López-Lara, “Polímeros para la estabilización volumétrica de arcillas expansivas” Revista Iberoamericana de Polímeros, vol. 11, n.° 3, pp. 159-168, 2010 [En línea]. Disponible en: http://dialnet.unirioja.es/servlet/oaiart?codigo=3694127.
M. Sol-Sánchez. M. C. Rubio-Gámez y F. Moreno-Navarro, “Structural analysis of polymer modified bituminous materials in the rehabilitation of light-medium traffic volume roads”, Construction and Building Materials, n.° 156, pp. 621-631, 2017. doi: https://doi.org/10.1016/j.conbuildmat.2017.09.006.
G. Ayala y C. Terreros, Estabilización y control de suelos expansivos utilizando polímeros. Samborondon, Ecuador: Universidad de Especialidades Espíritu Santo (UEES), pp. 1-115, 2017 [En línea]. Disponible en: http://repositorio.uees.edu.ec/123456789/1945
A. Hedge, “Geocell reinforced foundation beds-past findings, present trends and future prospects: A state-of-the-art-review”, Construction and Building Materials, vol. 154, pp. 658-674, 2017. doi: https://doi.org/10.1016/j.conbuildmat.2017.07.230
V. Sierra y M. Duarte, Estudio del comportamiento de un material de subrasante típico de Bogotá estabilizado con un sistema de geoceldas ante la aplicación de ciclos de carga y descarga mediante pruebas de laboratorio. Bogotá: Pontificia Universidad Javeriana, pp. 8-54, 2011. Disponible en: http://hdl.handle.net/10554/7505.
E. S. Perkins, “Geosynthetic subgrade stabilization – Field testing and design method calibration”, Transportation Geotechnics, n.° 10, pp. 22-34, 2017. doi: https://doi.org/10.1016/j.trgeo.2016.10.002.
C. Geiman, Stabilization of soft clay subgrades in Virginia phase I Laboratory study. Blacksburg, Virginia Polytechnic Institute and State University, 2005 [En línea]. Disponible en: https://vtechworks.lib.vt.edu/handle/10919/32499.
F. H. Khan, “Analysis of the influence of waste polymer on soil subgrade” International Research Journal of Engineering and Technology, n.° 3, pp. 1810-1817, 2016 [En línea]. Disponible en: https://www.irjet.net/archives/V3/i3/IRJET-V3I3379.pdf.
D. F. Lin y Li Chen, “Stabilization Treatment of Soft Subgrade Soil by Sewage Sludge Ash and Cement”, Journal of Harzardous Materials, vol. 162, n.° 1, pp. 321-327, 2008. doi: https://doi.org/10.1016/j.jhazmat.2008.05.060.
R. Hufenus, R. Rueegger, R. Banjac, P. Mayor, S. Springman y R. Bronnimann, “Full-scale field tests on geosynthetic reinforced unpaved roads on soft subgrade”, Geotextiles and Geomembranes, vol. 24, pp. 21-37, 2006. doi: https://doi.org/10.1016/j.geotexmem.2005.06.002.
V. T. N. Perugachi, Las características del suelo de subrasante de los caminos vecinales de la comunidad de Echaleche Pilahuín y su incidencia en el comportamiento de la capa de rodadura. Ambato, Ecuador: Universidad Técnica de Ambato, pp. 1-120, 2011 [En línea]. Disponible en: http://repositorio.uta.edu.ec/handle/123456789/2200.
Instituto Nacional de Vías - Invías, “Artículo 341 – 07”, 2007 [En línea]. Disponible en: ftp://ftp.unicauca.edu.co/Facultades/FIC/IngCivil/Especificaciones_Normas_INV-07/Especificaciones/Articulo341-07.pdf.
C. Aguilar, Cemento Portland: fabricación, propiedades y empleo. México: Instituto Mexicano del Cemento y del Concreto, pp. 12-25, 1970. Recuperado: http://imcyc.com/redcyc/imcyc/biblioteca_digital/tecnologia_del_concreto.pdf
Instituto Colombiano de Normas Técnicas – Icontec, NTC-121. Bogotá: Icontec, pp. 2-24, 2005.
A. D. Tirano Martínez, C. D. Moyano Cobos y M. E. Riascos Caipe, “Análisis de la resistencia y durabilidad de un suelo-cemento adicionando material no biodegradable polietileno malla Raschel (polisombra) reciclada en diferentes porcentajes en relación con el peso del suelo”, tesis de grado, Universidad de la Salle, Bogotá, 2016, pp. 15-95 [En línea]. Disponible en: http://hdl.handle.net/10185/20564
O. Amu, O. S. Owokade y O. Shitan, “Potentials of Coconut Shell and Husk Ash on the Geotechnical Properties of Lateritic Soil for Road Works”, International Journal of Engineering and Technology, vol. 3, n.° 2, pp. 87-94, 2011 [En línea]. Disponible en: https://www.idc-online.com/technical_references/pdfs/civil_engineering/Potentials%20of%20Coconut.pdf.
W. Butt, K. Gupta, H. Naik y S. Bhat, “Soil Sub- grade Improvement Using Human Hair Fiber”, International Journal of Scientific & Engineering Research, vol. 5, pp. 977-981, 2014 [En línea]. Disponible en: https://www.ijser.org/researchpaper/Soil-Sub-grade-Improvement-Using-Human-Hair-Fiber.pdf.
J. Díaz y J. Mejía, “Estabilización de suelos mediante el uso de un aditivo químico a base de compuestos inorgánicos”, trabajo de grado, Facultad de Ingenierías Fisicomecánicas, Universidad Industrial de Santander, Bucaramanga, pp. 5-63, 2004 [En línea]. Disponible en: http://docplayer.es/11977568-Estabilizacion-de-suelos-mediante-el-uso-de-un-aditivo-quimico-a-base-de-compuestos-inorganicos.html
K. Newman y J. S. Tingle, “Emulsion polymers for soil stabilization”, en Worldwide Airport Technology Transfer Conference, Atlantic City, pp. 5-65, 2004 [En línea]. Recuperado: http://www.airporttech.tc.faa.gov/Airport-R-D/Conference-and-Workshop/Airport-RD-Conference-Detail/dt/Detail/ItemID/429/Emulsion-Polymers-for-Soil-Stabilization
J. R. Menéndez Acurio, Ingeniería de Pavimentos. Materiales, Diseño y Conservación. Lima, Perú: Departamento de Imprenta de ICG, 2012, pp. 15-64.
Agencia de Obra Pública de la Junta de Andalucía, “Utilización de polímeros en la estabilización de suelos para su uso en carreteras, ejecución de un tramo experimental en el enlace de jédula de la A-382”, 2007, pp. 1-18 [En línea]. Disponible en: http://www.opandalucia.es/giasa_datos/documentos_bd/Documento%206.pdf.
C. J. Kibert, “Construction materials from recycled polymers”, Proceedings of the Institution of Civil Engineers - Structures and Buildings, vol. 99, n.° 4, pp. 455-464, 1993 [En línea]. Disponible en: http://www.icevirtuallibrary.com/content/serial/stbu
E. R. M. Díaz, Evaluación de la capacidad de soporte de subbases granulares tipo 3, con la adición de PVC reciclado a base de residuos de ropa industrial. Quito, Ecuador: Pontificia universidad Católica del Ecuador, 2016, pp. 5-54 [En línea]. Disponible en: http://repositorio.puce.edu.ec/handle/22000/11249.
A. Estabragh, M. Naseh, I. Beytolahpour y A. Javadi, “Strength of a clay soil and soil–cement mixture with resin”, Ground Improvement, vol. 166, n.° GI2, pp. 108-113, 2012 [En línea]. Disponible en: https://ore.exeter.ac.uk/repository/bitstream/handle/10871/21355/Strength%20of%20a%20clay%20soil%20and%20soil-cement%20mixture%20with%20resin.pdf?sequence=1.
L. Festugato, E. Menger, F. Benezra y E. A. Kipper, “Fibre-reinforced cemented soils compressive and tensile strength assessment as a function of filament length”, Geotextiles and Geomembranes, vol. 45, n.° 1, pp. 77-82, 2017. doi: https://doi.org/10.1016/j.geotexmem.2016.09.001.
T. Lenoir, M. Preteseille y S. Ricordel, “Contribution of the Fiber Reinforcement on the Fatigue Behavior of Two Cement-modified Soils”, International Journal of Fatigue, vol. 93, n.° 1, pp. 71-81, 2016. doi: https://10.1016/j.ijfatigue.2016.08.007.
B. G. Moreno Cárdenas, O. Ibarra Linares y M. E. Riascos Caipe, “Ensayo Proctor estándar y modificado para mezcla suelo cemento con adición de polisombra”, tesis de grado, Universidad de la Salle, Bogotá, pp. 5-26, 2016 [En línea]. Disponible en: http://repository.lasalle.edu.co/bitstream/handle/10185/22391/40121091_2017_P1.pdf?sequence=1&isAllowed=y.
E. Rodríguez Rincón, H. A. Rondón Quintana, D. M. Vélez Pinzón y L. C. Aguirre, “Influencia de la inclusión de desecho de PVC sobre el CBR de un material granular tipo subbase”, tesis de grado, Facultad de Ingenierías, Universidad de Medellín, Medellín, pp. 3-24, 2006 [En línea]. Disponible en: https://revistas.udem.edu.co/index.php/ingenierias/article/view/232.
N. C. Consoli, R. R. Moraes y L. Festugato, “Split tensile strength of monofilament polypropylene fiber-reinforced cemented sandy soils”, Geosynthetics International, vol. 18, n.° 2, pp. 57-62, 2011. doi: https://doi.org10.1680/gein.2011.18.2.57.
D. R. Hurtado, “Mejoramiento de suelos expansivos mediante inclusiones de fibras”, tesis de grado, Universidad Autónoma de Querétaro, Querétaro, pp. 1-69, 2014 [En línea]. Disponible en: http://hdl.handle.net/123456789/1811.
B. Kalantari y B. Huat, “Peat soil stabilization, using Ordinary Portland Cement, Polypropylene fibers, and Air Curing Technique”, The European Journal of Government and Economics, vol. 13, pp. 1-13, 2008
C. A. Anagnostopoulos, “Strength properties of epoxy resin–soil–cement mixtures”, Construction Materials, vol. 170, n.° 3, pp. 123-133, 2016. doi: https://10.1680/jcoma.14.00023.
A. Tirado y C. Moyano, “Análisis de la resistencia y durabilidad de un suelo-cemento adicionando material no biodegradable polietileno malla Raschel (polisombra) reciclada en diferentes porcentajes en relación con el peso del suelo”, tesis de grado, Universidad de la Salle, Bogotá, 2016 [En línea]. Disponible en: http://hdl.handle.net/10185/20564.
R. Estabragh, P. Namdar y A. Javadi, “Behavior of cement-stabilized clay reinforced with nylon fiber” Geosynthetics International, vol. 19, n.° 1, pp. 85-92, 2012. doi: https://10.1680/gein.2012.19.1.85.
A. R. Estabragh, S. Ranjbari y A. Javadi, “Properties of a Clay Soil and Soil-Cement Reinforced with Polypropylene Fibers”, Aci Materials Journal, vol. 2, n.º 114, pp. 2-41, 2017. doi: https://doi.org/10.14359/51689469.
J. Galindo, “Evaluar la inclusión de micropolímeros y cemento Portland como agente estabilizador de suelos para conformación de rasantes”, tesis de grado, Universidad Militar Nueva Granada, Bogotá, pp. 1-16, 2018 [En línea]. Disponible en: http://hdl.handle.net/10654/17095.
D. Bustos y J. Sarmiento, “Análisis del comportamiento de base granular estabilizada con cemento sustituyendo con material no biodegradable tereftalato de polietileno (PET) en la fracción del agregado que pasa el tamiz # 4 y se retiene en el # 16”, trabajo de grado, Universidad de la Salle, Bogotá, pp. 4-89, 2016 [En línea]. Disponible en: http://hdl.handle.net/10185/18915.
L. Meneses y L. Fuentes, “Base estabilizada con cemento modificada con PET reciclado”, trabajo de grado, Universidad de la Salle, Bogotá, pp. 2-57, 2015. Disponible en: http://hdl.handle.net/10185/17405.
A. Luis, N. Rendón y M. Korody, “Diseños de mezcla de tereftalato de polietileno (PET) – cemento”, Revista de la Facultad de Ingeniería, Universidad Central de Venezuela, vol. 23, n.° 1, pp. 77-86, 2008 [En línea]. Disponible en: http://saber.ucv.ve/ojs/index.php/rev_fiucv/article/view/5048/4855.
N. Prakhash, D. Kumar, N. Guruvignesh, A. Harichandra y D. Muthukumar, “Soil Stabilization by Using Waste Plastic”. International Journal of Advance Research in Science and Engineering, vol. 7, n.° 4, pp. 317-326, 2016 [En línea]. Disponible en: http://www.ijarse.com/images/fullpdf/1524229680_IEI1034ijarse.pdf.
M. Mirzababaei, A. Arulrajah y M. Ouston, “Polymers for Stabilization of Soft Clay Soils”, Procedia Engineering, n.° 189, pp. 25-32, 2017. doi: https://10.1016/j.proeng.2017.05.005.
J. S. Yadav y S. K. Tiwari, “Behaviour of cement stabilized treated coir fibre-reinforced clay-pond ash mixtures”, Journal of Building Engineering, vol. 8, pp. 131-140, 2016. doi: http://10.1016/j.jobe.2016.10.006.
J. Paul y A. R. Sneha, “Effect of random inclusion of bamboo fibers on strength behavior of flyash treated black cotton soil”, International Journal of Civil Engineering and Technology, vol. 7, nº 5, pp. 153-160, 2016 [En línea]. Disponible en: http://www.iaeme.com/MasterAdmin/uploadfolder/IJCIET_07_05_017/IJCIET_07_05_017.pdf.
L. R. V. Torres, Diseño de pavimentos flexibles con superficie de rodamiento conformada con asfaltos ahulados y reforzados con polímeros. México: Escuela Superior de Ingeniería y Arquitectura, 2011 [En línea]. Disponible en: http://tesis.ipn.mx:8080/xmlui/handle/123456789/9669.
R. Leiva, “Utilización de bolsas de polietileno para el mejoramiento de suelo a nivel de la subrasante en el Jr. Arequipa, progresiva km 0+000 – km 0+100”, tesis de grado, Universidad Nacional del Centro del Perú, Distrito de Orcotuna, Concepción, Huancayo, 2016. Recuperado: http://repositorio.uncp.edu.pe/handle/UNCP/1181.
T. Zhang, G. Cai y S. Liu, “Application of lignin-based by-product stabilized silty soil in highway subgrade: A field investigation”, Journal of Cleaner Production, vol. 142, pp. 4243-4257, 2017. Disponible en: https://doi.org/10.1016/j.jclepro.2016.12.002.
R. H. &. G. Paúl, Mejoramiento de subrasantes de baja capacidad portante mediante el uso de polímeros reciclados en carreteras, tesis de grado, Universidad Nacional del Centro del Perú, Distrito de Orcotuna, Concepción, Huancayo, pp. 1-103, 2014 [En línea]. Disponible en: http://repositorio.uncp.edu.pe/handle/UNCP/416.
N. Vargas, “Efecto de la adición de fibra de polímeros reciclados en el valor de CBR de suelos granulares en pavimentos”, tesis de grado, Escuela Académica Profesional de Ingeniería Civil, Huancayo, pp. 5-102, 2017 [En línea]. Disponible en: http://repositorio.continental.edu.pe/handle/continental/3371.
G. P. Ramos Hinojosa, “Mejoramiento de subrasantes de baja capacidad portante mediante el uso de polímeros reciclados en carreteras”, tesis de grado, Universidad Nacional del Centro del Perú, Huancayo, pp. 1-103, 2014. [En línea]. Disponible en: http://repositorio.uncp.edu.pe/handle/UNCP/416.
U. Rajesh, S. Sajjaab y V. Chakravarthi, “Studies on Engineering Performance of Geogrid Reinforced”, Transportation Research Procedia, vol. 17, pp. 164-173, 2016. doi: https://10.1016/j.trpro.2016.11.072
J. Love, H. Burd, W. Milligan y G. Houlsby, “Analytical and model studies of reinforcement of a layer of granular fill on a soft clay subgrade”, Geotech, vol. 24, pp. 611-622, 1987 [En línea]. Disponible en: http://www.nrcresearchpress.com/doi/abs/10.1139/t87-075#.W9ZwepMzbDc.
Copyright (c) 2019 Ingeniaría Solidaria

This work is licensed under a Creative Commons Attribution 4.0 International License.
Cession of rights and ethical commitment
As the author of the article, I declare that is an original unpublished work exclusively created by me, that it has not been submitted for simultaneous evaluation by another publication and that there is no impediment of any kind for concession of the rights provided for in this contract.
In this sense, I am committed to await the result of the evaluation by the journal Ingeniería Solidaría before considering its submission to another medium; in case the response by that publication is positive, additionally, I am committed to respond for any action involving claims, plagiarism or any other kind of claim that could be made by third parties.
At the same time, as the author or co-author, I declare that I am completely in agreement with the conditions presented in this work and that I cede all patrimonial rights, in other words, regarding reproduction, public communication, distribution, dissemination, transformation, making it available and all forms of exploitation of the work using any medium or procedure, during the term of the legal protection of the work and in every country in the world, to the Universidad Cooperativa de Colombia Press.