Análisis global de la gestión ambiental de los residuos industriales peligrosos
revisiónsistemática y bibliométrica
Introducción: El artículo es producto de una investigación sobre la gestión sostenible de residuos peligrosos en la industria, a partir de una revisión bibliométrica sistemática y global, desarrollada en la Fundación Universitaria de Popayán en 2024.
Problema: La gestión inadecuada de residuos industriales peligrosos representa un riesgo significativo para la salud y el medio ambiente, lo que subraya la necesidad de integrar prácticas sostenibles y la economía circular en su gestión.
Objetivo: El objetivo del estudio es realizar una revisión sistemática y un análisis bibliométrico sobre la gestión de residuos industriales peligrosos a nivel mundial, identificando tendencias y tecnologías innovadoras.
Metodología: La metodología se basa en la declaración PRISMA para garantizar una revisión transparente, complementada con un análisis bibliométrico mediante Vosviewer.
Resultados: Existe un aumento en la literatura sobre la gestión de residuos industriales peligrosos, con especial atención a la industria metalúrgica y a los métodos sostenibles, con China e India a la cabeza en publicaciones, aunque se observó una disminución entre 2016 y 2019 debido a cambios en las prioridades de investigación.
Conclusión: El estudio destaca la importancia de adoptar prácticas circulares en la gestión de residuos industriales peligrosos y fortalecer las alianzas internacionales para abordar los desafíos ambientales.
Originalidad: La revisión sistemática proporciona una matriz de conocimiento sobre la gestión de residuos industriales peligrosos, destacando las tendencias hacia la economía circular y el interés en prácticas sostenibles.
Limitaciones: La revisión presenta algunas limitaciones que podrían abordarse en otras investigaciones, como realizar una revisión más exhaustiva del tema de estudio e incluir en la revisión no solo Scopus y Google Académico, sino también Web of Science y otras fuentes.
Cómo citar
Licencia
Derechos de autor 2025 Ingeniería Solidaria
Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Compromiso ético y cesión de derechos
El autor debe declarar que su trabajo es original e inédito y que no se ha postulado a evaluación simultánea para su publicación por otro medio. Además, debe asegurar que no tiene impedimentos de ninguna naturaleza para la concesión de los derechos previstos en el contrato.
El autor se compromete a esperar el resultado de evaluación de la revista Ingeniería Solidaria, antes de considerar su presentación a otro medio; en caso de que la respuesta de publicación sea positiva, adicionalmente, se compromete a responder por cualquier acción de reivindicación, plagio u otra clase de reclamación que al respecto pudiera sobrevenir por parte de terceros.
Asimismo, debe declarar que, como autor o coautor, está de acuerdo por completo con los contenidos presentados en el trabajo y ceder todos los derechos patrimoniales, es decir, su reproducción, comunicación pública, distribución, divulgación, transformación, puesta a disposición y demás formas de utilización de la obra por cualquier medio o procedimiento, por el término de su protección legal y en todos los países del mundo, al Fondo Editorial de la Universidad Cooperativa de Colombia, de manera gratuita y sin contraprestación presente o futura.
[1] A. Kumar et al., “A critical review on sustainable hazardous waste management strategies: a step towards a circular economy,” Environ. Sci. Pollut. Res., vol. 30, no. 48, pp. 105030–105055, 2023, doi: https://doi.org/10.1007/s11356-023-29511-8 DOI: https://doi.org/10.1007/s11356-023-29511-8
[2] I. M. Bamatov et al., “Industrial waste disposal: Development of new technologies and economic mechanisms of management,” Int. J. Recent Technol. Eng., vol. 8, no. 3, pp. 7944–7949, 2019. [Online]. Available: https://dspace.kpfu.ru/xmlui/handle/net/156820 DOI: https://doi.org/10.35940/ijrte.C6634.098319
[3] S. R. Naqvi, B. Beig, and M. Naqvi, “Circular economy approach to address the industrial solid waste management,” in Handbook of Solid Waste Management: Sustainability through Circular Economy, Singapore: Springer Nature Singapore, 2022, pp. 421–440. doi: https://doi.org/10.1007/978-981-16-4230-2_62 DOI: https://doi.org/10.1007/978-981-16-4230-2_62
[4] U. Suksanguan et al., “Structural equation model of factors influencing the selection of industrial waste disposal service in cement kilns,” Sustainability, vol. 14, no. 7, p. 4109, 2022, doi: https://doi.org/10.3390/su14074109 DOI: https://doi.org/10.3390/su14074109
[5] J. M. Mesa-Fernández et al., “Methodology for industrial solid waste management: Implementation to sludge management in Asturias (Spain),” Waste Manag. Res., vol. 32, no. 11, pp. 1103–1112, 2014, doi: https://doi.org/10.1177/0734242x14552552 DOI: https://doi.org/10.1177/0734242X14552552
[6] R. Chandrappa and D. B. Das, “Waste from industry and commercial activity,” in Solid Waste Management: Principles and Practice, Cham: Springer International Publishing, 2024, pp. 369–420. doi: https://doi.org/10.1007/978-3-031-50442-6_9 DOI: https://doi.org/10.1007/978-3-031-50442-6_9
[12] J. Yan et al., “Thermal treatment techniques: incineration, gasification, and pyrolysis,” in Sustainable Solid Waste Management, 2016, pp. 149–185, doi: https://doi.org/10.1061/9780784414101.ch07 DOI: https://doi.org/10.1061/9780784414101.ch07
[13] S. Krishnan et al., “Current technologies for recovery of metals from industrial wastes: An overview,” Environ. Technol. Innov., vol. 22, p. 101525, 2021, doi: https://doi.org/10.1016/j.eti.2021.101525 DOI: https://doi.org/10.1016/j.eti.2021.101525
[14] J. Jayamuthunagai et al., “Valorization of industrial wastes for biofuel production: Challenges and opportunities,” in Biomass, Biofuels, Biochemicals, A. Pandey, R. D. Tyagi, and S. Varjani, Eds., Elsevier, 2021, pp. 231–245. doi: https://doi.org/10.1016/B978-0-12-821878-5.00010-6 DOI: https://doi.org/10.1016/B978-0-12-821878-5.00010-6
[15] X. Lin et al., “A review on carbon storage via mineral carbonation: Bibliometric analysis, research advances, challenge, and perspectives,” Sep. Purif. Technol., p. 126558, 2024, doi: https://doi.org/10.1016/j.seppur.2024.126558 DOI: https://doi.org/10.1016/j.seppur.2024.126558
[16] D. M. Rodrigues, M. F. da Silva, F. L. C. Almeida, A. H. F. de Mélo, M. B. S. Forte, C. Martín, H. D. S. Barud, H. M. Baudel, and R. Goldbeck, “A green approach to biomass residue valorization: Bacterial nanocellulose production from agro-industrial waste,” Biocatalysis and Agricultural Biotechnology, p. 103036, 2024, doi: https://doi.org/10.1016/j.bcab.2024.103036 DOI: https://doi.org/10.1016/j.bcab.2024.103036
[17] Z. Wang, D. Yan, and L. Wang, “Research Status and Development Trend Analysis of Hazardous Waste Pollution Prevention Technology Based on Bibliometrics,” Environmental Sanitation Engineering, vol. 31, no. 5, pp. 73–85, 2023. [Online]. Available: http://www.srhj.org.cn/EN/Y2023/V31/I5/73
[18] F. Aliyah, I. Kambali, A. F. Setiawan, Y. M. Radzi, and A. A. Rahman, “Utilization of steel slag from industrial waste for ionizing radiation shielding concrete: A systematic review,” Construction and Building Materials, vol. 382, p. 131360, 2023, doi: https://doi.org/10.1016/j.conbuildmat.2023.131360 DOI: https://doi.org/10.1016/j.conbuildmat.2023.131360
[19] A. B. Botelho-Junior, J. A. S. Tenório, and D. C. R. Espinosa, “Separation of critical metals by membrane technology under a circular economy framework: A review of the state-of-the-art,” Processes, vol. 11, no. 4, p. 1256, 2023, doi: https://doi.org/10.3390/pr11041256 DOI: https://doi.org/10.3390/pr11041256
[20] X. Hu et al., “Mapping the research on desulfurization wastewater: Insights from a bibliometric review (1991–2021),” Chemosphere, vol. 314, p. 137678, 2023, doi: https://doi.org/10.1016/j.chemosphere.2022.137678 DOI: https://doi.org/10.1016/j.chemosphere.2022.137678
[21] G. Mao, H. Hu, X. Liu, J. Crittenden, and N. Huang, “A bibliometric analysis of industrial wastewater treatments from 1998 to 2019,” Environmental Pollution, vol. 275, p. 115785, 2021, doi: https://doi.org/10.1016/j.envpol.2020.115785 DOI: https://doi.org/10.1016/j.envpol.2020.115785
[22] A. T. Ubando, A. D. M. Africa, M. C. Maniquiz-Redillas, A. B. Culaba, W. H. Chen, and J. S. Chang, “Microalgal biosorption of heavy metals: a comprehensive bibliometric review,” Journal of Hazardous Materials, vol. 402, p. 123431, 2021, doi: https://doi.org/10.1016/j.jhazmat.2020.123431 DOI: https://doi.org/10.1016/j.jhazmat.2020.123431
[23] M. P. Jiménez-Castro, L. S. Buller, W. G. Sganzerla, and T. Forster-Carneiro, “Bioenergy production from orange industrial waste: a case study,” Biofuels, Bioproducts and Biorefining, vol. 14, no. 6, pp. 1239–1253, 2020, doi: https://doi.org/10.1002/bbb.2128 DOI: https://doi.org/10.1002/bbb.2128
[24] P. Yang, L. J. Zhang, X. J. Wang, and Z. L. Wang, “Exploring the management of industrial hazardous waste based on recent accidents,” Journal of Loss Prevention in the Process Industries, vol. 67, p. 104224, 2020, doi: https://doi.org/10.1016/j.jlp.2020.104224 DOI: https://doi.org/10.1016/j.jlp.2020.104224
[25] Z. Zhang et al., “Insight into the impact of industrial waste co-disposal with MSW on groundwater contamination at the open solid waste dumping sites,” Chemosphere, vol. 344, p. 140429, 2023, doi: https://doi.org/10.1016/j.chemosphere.2023.140429 DOI: https://doi.org/10.1016/j.chemosphere.2023.140429
[26] C. Yan et al., “Highly efficient catalytic ozonation degradation of levofloxacin by facile hydrogenation-modified red mud wastes,” Environmental Pollution, vol. 334, p. 122149, 2023, doi: https://doi.org/10.1016/j.envpol.2023.122149 DOI: https://doi.org/10.1016/j.envpol.2023.122149
[27] Q. Kanwal, J. Li, and X. Zeng, “Mapping recyclability of industrial waste for anthropogenic circularity: a circular economy approach,” ACS Sustainable Chemistry & Engineering, vol. 9, no. 35, pp. 11927–11936, 2021, doi: https://doi.org/10.1021/acssuschemeng.1c04139 DOI: https://doi.org/10.1021/acssuschemeng.1c04139
[28] S. Gowthaman and T. Selvaraju, “Efficient integration of electrocoagulation treatment with the spray-pyrolyzed activated carbon coating on stainless steel electrodes for textile effluent-bath reuse with ease,” Water Environment Research, vol. 95, no. 10, p. e10938, 2023, doi: https://doi.org/10.1002/wer.10938 DOI: https://doi.org/10.1002/wer.10938
[29] S. Gupta and S. Chaudhary, “Use of fly ash for the development of sustainable construction materials,” in New Materials in Civil Engineering, pp. 677–689, Butterworth-Heinemann, 2020, doi: https://doi.org/10.1016/B978-0-12-818961-0.00021-1 DOI: https://doi.org/10.1016/B978-0-12-818961-0.00021-1
[30] K. Packrisamy and K. Jayakumar, “Fly ash and ceramic tile industrials waste: landfills to construction materials,” Clean Technologies and Environmental Policy, vol. 25, no. 10, pp. 3247–3261, 2023, doi: https://doi.org/10.1007/s10098-023-02624-x DOI: https://doi.org/10.1007/s10098-023-02624-x
[31] L. G. L. M. Edirisinghe, A. A. P. de Alwis, S. Prakash, M. Wijayasundara, and N. A. Hemali, “A volume-based analysis method to determine the economic value of mixed industrial waste,” Cleaner Environmental Systems, vol. 11, p. 100142, 2023, doi: https://doi.org/10.1016/j.cesys.2023.100142 DOI: https://doi.org/10.1016/j.cesys.2023.100142
[32] K. Rani and K. Senthil, “Potential of industrial waste and plastic nanomaterials as a danger or a way to create a sustainable environment: a critical review,” Nanotechnology for Environmental Engineering, vol. 8, no. 4, pp. 879–890, 2023, doi: https://doi.org/10.1007/s41204-023-00330-z DOI: https://doi.org/10.1007/s41204-023-00330-z
[33] X. Zhao, R. Webber, P. Kalutara, W. Browne, and J. Pienaar, “Construction and demolition waste management in Australia: A mini-review,” Waste Management & Research, vol. 40, no. 1, pp. 34–46, 2022, doi: https://doi.org/10.1177/0734242X211029446 DOI: https://doi.org/10.1177/0734242X211029446
[34] S. Sadala et al., “Resource recovery as alternative fuel and raw material from hazardous waste,” Waste Management & Research, vol. 37, no. 11, pp. 1063–1076, 2019, doi: https://doi.org/10.1177/0734242X19854124 DOI: https://doi.org/10.1177/0734242X19854124
[35] S. K. Verma, R. Gupta, A. Singhal, and A. Devi, “Utilization of Industrial Waste as a fertilizer in Ornamental Plants,” [Online]. Available: http://dspace.bits-pilani.ac.in:8080/xmlui/handle/123456789/2240
[36] A. Kaur, “Approaches to Agro-industrial Solid Waste Disposal and Bioenergy Generation,” in Advances in Environmental Biotechnology, R. Kumar, A. Sharma, and S. Ahluwalia, Eds., Springer, Singapore, 2017, pp. 1, doi: https://doi.org/10.1007/978-981-10-4041-2_11 DOI: https://doi.org/10.1007/978-981-10-4041-2_11
[37] S. Srikanth, M. Kumar, and S. K. Puri, “Bio-electrochemical system (BES) as an innovative approach for sustainable waste management in petroleum industry,” Bioresource Technology, vol. 265, pp. 506–518, 2018, doi: https://doi.org/10.1016/j.biortech.2018.02.059 DOI: https://doi.org/10.1016/j.biortech.2018.02.059
[38] D. Lee, J. Kim, and H. S. Park, “Characteristics of industrial hazardous waste generation in South Korea from 2008 to 2018 based on decoupling and decomposition analysis,” Waste Management & Research, vol. 40, no. 8, pp. 1322–1331, 2022a, doi: https://doi.org/10.1177/0734242X211063728 DOI: https://doi.org/10.1177/0734242X211063728
[39] D. Lee, J. Kim, and H. S. Park, “Characterization of industrial hazardous waste generation in South Korea using input-output approach,” Resources, Conservation and Recycling, vol. 183, p. 106365, 2022b, doi: https://doi.org/10.1016/j.resconrec.2022.106365 DOI: https://doi.org/10.1016/j.resconrec.2022.106365
[40] D. Lee, J. Kim, G. Sonnemann, and H. S. Park, “Identifying the socioeconomic determinants of industrial hazardous waste generation: South Korea as a case study,” Science of The Total Environment, vol. 901, p. 166525, 2023, doi: https://doi.org/10.1016/j.scitotenv.2023.166525 DOI: https://doi.org/10.1016/j.scitotenv.2023.166525
[41] Z. Khan, S. T. H. Shah, and D. Murodov, “Poor Industrial and Domestic Wastewater Management in Developing Countries, Resulting in Depleting Drinkable Water Resources: a Geophysical and Hydrochemical Application,” Water, Air, & Soil Pollution, vol. 234, no. 12, p. 758, 2023, doi: https://doi.org/10.1007/s11270-023-06765-z DOI: https://doi.org/10.1007/s11270-023-06765-z
[42] N. Ahmad, M. Usman, H. R. Ahmad, M. Sabir, Z. U. R. Farooqi, and M. T. Shehzad, “Environmental implications of phosphate-based fertilizer industrial waste and its management practices,” Environmental Monitoring and Assessment, vol. 195, no. 11, p. 1326, 2023, doi: https://doi.org/10.1007/s10661-023-11958-4 DOI: https://doi.org/10.1007/s10661-023-11958-4
[43] P. Usapein and O. Chavalparit, “Development of sustainable waste management toward zero landfill waste for the petrochemical industry in Thailand using a comprehensive 3R methodology: A case study,” Waste Management & Research, vol. 32, no. 6, pp. 509–518, 2014, doi: https://doi.org/10.1177/0734242X14533604 DOI: https://doi.org/10.1177/0734242X14533604
[44] S. Thongkong, S. Worawattanaparinya, and T. Silpcharu, “Guidelines for Effective Industrial Waste Management of the Industrial Business Sectors,” Asian Journal of Water, Environment and Pollution, vol. 19, no. 3, pp. 51–57, 2022, doi: https://doi.org/10.3233/AJW220039 DOI: https://doi.org/10.3233/AJW220039
[45] M. Yamanaka, T. Hachimura, and S. Hasegawa, “Distribution of landfill by geophysical exploration methods at illegal industrial wastes disposal site,” GEOMATE Journal, vol. 9, no. 17, pp. 1342–1347, 2015. DOI: https://doi.org/10.21660/2015.17.4306
[46] M. Farzadkia et al., “Evaluation of industrial wastes management practices: Case study of the Savojbolagh industrial zone, Iran,” Waste Management & Research, vol. 38, no. 1, pp. 44–58, 2019, doi: https://doi.org/10.1177/0734242X19865777 DOI: https://doi.org/10.1177/0734242X19865777
[47] A. A. Shayesteh et al., “Industrial waste management using the rapid impact assessment matrix method for an industrial park,” Global Journal of Environmental Science and Management, vol. 6, no. 2, pp. 261–274, 2020, doi: https://doi.org/10.22034/gjesm.2020.02.10
[48] B. Xu, J. Qin, and Y. Yi, “Use of ladle slag for CO₂ sequestration and zinc immobilization,” Resources, Conservation and Recycling, vol. 199, p. 107220, 2023, doi: https://doi.org/10.1016/j.resconrec.2023.107220 DOI: https://doi.org/10.1016/j.resconrec.2023.107220
[49] C. H. Tsai, Y. H. Shen, and W. T. Tsai, “Sustainable material management of industrial hazardous waste in Taiwan: Case studies in circular economy,” Sustainability, vol. 13, no. 16, p. 9410, 2021, doi: https://doi.org/10.3390/su13169410. DOI: https://doi.org/10.3390/su13169410
[50] T. T. Wondim et al., “Wastewater treatment plant performance assessment using time-function-based effluent quality index and multiple regression models: the case of Bahir Dar textile factory,” Environmental Monitoring and Assessment, vol. 195, no. 11, p. 1360, 2023, doi: https://doi.org/10.1007/s10661-023-11952-w DOI: https://doi.org/10.1007/s10661-023-11952-w
[51] D. M. Yacout y M. S. Hassouna, “Identifying potential environmental impacts of waste handling strategies in textile industry,” Environmental Monitoring and Assessment, vol. 188, pp. 1–13, 2016, doi: https://doi.org/10.1007/s10661-016-5443-8 DOI: https://doi.org/10.1007/s10661-016-5443-8
[52] D. G. Bassyouni, M. H. Abdel-Aziz, E. Z. El-Ashtoukhy, G. H. Sedahmed, e I. A. El-Gheriany, “Electrocoagulation for Cyanide Removal from Industrial Waste Solutions: an Innovative Cell Design and Optimization Using Response Surface Methodology,” Water, Air, & Soil Pollution, vol. 234, no. 11, p. 674, 2023, doi: https://doi.org/10.1007/s11270-023-06691-0 DOI: https://doi.org/10.1007/s11270-023-06691-0
[53] L. Sefouhi y L. Bahmed, “Risk assessment of industrial waste: case of an Algerian company,” Case Studies in the Environment, vol. 7, no. 1, p. 2001786, 2023, doi: https://doi.org/10.1525/cse.2023.2001786 DOI: https://doi.org/10.1525/cse.2023.2001786
[54] Y. Schoeman, P. Oberholster, y V. Somerset, “A decision-support framework for industrial waste management in the iron and steel industry: A case study in Southern Africa,” Case Studies in Chemical and Environmental Engineering, vol. 3, p. 100097, 2021, doi: https://doi.org/10.1016/j.cscee.2021.100097 DOI: https://doi.org/10.1016/j.cscee.2021.100097
[55] L. J. McDonald et al., “Synergy between industry and agriculture: Techno-economic and life cycle assessments of waste recovery for crop growth in glasshouses,” Journal of Cleaner Production, vol. 432, p. 139650, 2023, doi: https://doi.org/10.1016/j.jclepro.2023.139650 DOI: https://doi.org/10.1016/j.jclepro.2023.139650
[56] M. Chalaris et al., “Advancements and sustainable strategies for the treatment and management of wastewaters from metallurgical industries: an overview,” Environmental Science and Pollution Research, vol. 30, no. 57, pp. 119627–119653, 2023, doi: https://doi.org/10.1007/s11356-023-30891-0 DOI: https://doi.org/10.1007/s11356-023-30891-0
[57] J. J. Mascarell et al., “Production of crude oil from industrial wastes and wastewaters by hydrothermal liquefaction,” Journal of Material Cycles and Waste Management, vol. 25, no. 6, pp. 3476–3489, 2023, doi: https://doi.org/10.1007/s10163-023-01771-z DOI: https://doi.org/10.1007/s10163-023-01771-z
[58] M. A. Riera, S. Maldonado, y R. Palma, “Multicriteria analysis and GIS applied to the selection of agroindustrial waste. A case study contextualized to the Ecuadorian reality,” Journal of Cleaner Production, vol. 429, p. 139505, 2023, doi: https://doi.org/10.1016/j.jclepro.2023.139505 DOI: https://doi.org/10.1016/j.jclepro.2023.139505
[59] V. D. Muñoz-Soto et al., “COVID-19, waste production and municipal recycling programs: Insights from Chile to the global south,” Science of The Total Environment, vol. 899, p. 165388, 2023, doi: https://doi.org/10.1016/j.scitotenv.2023.165388 DOI: https://doi.org/10.1016/j.scitotenv.2023.165388
[60] M. F. Muñoz-Vélez et al., “Circular Economy: Adding Value to the Post-Industrial Waste through the Transformation of Aluminum Dross for Cement Matrix Applications,” Sustainability, vol. 15, no. 18, p. 13952, 2023, doi: https://doi.org/10.3390/su151813952 DOI: https://doi.org/10.3390/su151813952
[61] O. Mendieta, L. Castro, J. Rodríguez, y H. Escalante, “Management and valorization of waste from a non-centrifugal cane sugar mill via anaerobic co-digestion: Technical and economic potential,” Bioresource Technology, vol. 316, p. 123962, 2020, doi: https://doi.org/10.1016/j.biortech.2020.123962 DOI: https://doi.org/10.1016/j.biortech.2020.123962
[62] L. M. Machado et al., “Simultaneous production of mesoporous biochar and palmitic acid by pyrolysis of brewing industry wastes,” Waste Management, vol. 113, pp. 96–104, 2020, doi: https://doi.org/10.1016/j.wasman.2020.05.038 DOI: https://doi.org/10.1016/j.wasman.2020.05.038
[63] C. F. Valdés et al., “Co-gasification and co-combustion of industrial solid waste mixtures and their implications on environmental emissions, as an alternative management,” Waste Management, vol. 101, pp. 54–65, 2020, doi: https://doi.org/10.1016/j.wasman.2019.09.037 DOI: https://doi.org/10.1016/j.wasman.2019.09.037
[64] M. J. Page et al., “Updating guidance for reporting systematic reviews: development of the PRISMA 2020 statement,” Journal of Clinical Epidemiology, vol. 134, pp. 103–112, 2021, doi: https://doi.org/10.1016/j.jclinepi.2021.02.003 DOI: https://doi.org/10.1016/j.jclinepi.2021.02.003
[65] N. Donthu et al., “How to conduct a bibliometric analysis: An overview and guidelines,” Journal of Business Research, vol. 133, pp. 285–296, 2021, doi: https://doi.org/10.1016/j.jbusres.2021.04.070 DOI: https://doi.org/10.1016/j.jbusres.2021.04.070
[66] I. Passas, “Bibliometric Analysis: The Main Steps,” Encyclopedia, vol. 4, no. 2, pp. 1014–1025, 2024, doi: https://doi.org/10.3390/encyclopedia4020065 DOI: https://doi.org/10.3390/encyclopedia4020065
[67] O. Öztürk, R. Kocaman, y D. K. Kanbach, “How to design bibliometric research: an overview and a framework proposal,” Review of Managerial Science, vol. 14, p. 1, 2024, doi: https://doi.org/10.1007/s11846-024-00738-0 DOI: https://doi.org/10.1007/s11846-024-00738-0
[68] R. Pranckutė, “Web of Science (WoS) and Scopus: The titans of bibliographic information in today’s academic world,” Publications, vol. 9, no. 1, p. 12, 2021, doi: https://doi.org/10.3390/publications9010012 DOI: https://doi.org/10.3390/publications9010012
[69] K. E. Villanueva-Jimenez et al., “Gestión de residuos sólidos y la contaminación ambiental en las empresas industriales: una revisión de la literatura científica entre 2011–2020,” Polo del Conocimiento, vol. 7, no. 5, pp. 79–92, 2022, doi: https://doi.org/10.23857/pc.v7i5.3946
[70] J. Tineo-Machado y Y. M. Valiente-Saldaña, “Manejo de residuos sólidos para reducir la contaminación del medio ambiente: Revisión sistemática,” Ciencia Latina Revista Científica Multidisciplinar, vol. 6, no. 4, pp. 578–601, 2022, doi: https://doi.org/10.37811/cl_rcm.v6i4.2605 DOI: https://doi.org/10.37811/cl_rcm.v6i4.2605
[71] J. A. Galvis-González, “Residuos sólidos: problema, conceptos básicos y algunas estrategias de solución,” Revista Gestión y Región, no. 22, pp. 101–119, 2016. [Online]. Available: https://revistas.ucp.edu.co/index.php/gestionyregion/article/view/149
[72] O. Dziubaniuk, M. Ivanova-Gongne, y E. Berdysheva, “Challenges of network interaction in managing sustainable development projects in developing countries: case of an international consulting company,” Critical Perspectives on International Business, vol. 18, no. 4, pp. 546–573, 2022, doi: https://doi.org/10.1108/cpoib-08-2020-0115 DOI: https://doi.org/10.1108/cpoib-08-2020-0115
[73] E. A. B. Cárcamo y R. Peñabaena-Niebles, “Opportunities and challenges for the waste management in emerging and frontier countries through industrial symbiosis,” Journal of Cleaner Production, vol. 363, p. 132607, 2022, doi: https://doi.org/10.1016/j.jclepro.2022.132607 DOI: https://doi.org/10.1016/j.jclepro.2022.132607
[74] M. Margallo et al., “Enhancing waste management strategies in Latin America under a holistic environmental assessment perspective: A review for policy support,” Science of the Total Environment, vol. 689, pp. 1255–1275, 2019, doi: https://doi.org/10.1016/j.scitotenv.2019.06.393 DOI: https://doi.org/10.1016/j.scitotenv.2019.06.393
[75] P. Vanegas et al., “E-waste management in Ecuador, current situation and perspectives,” en Handbook of Electronic Waste Management, pp. 479–515, Butterworth-Heinemann, 2020, doi: https://doi.org/10.1016/B978-0-12-817030-4.00013-9 DOI: https://doi.org/10.1016/B978-0-12-817030-4.00013-9
